emastiff or w4b alarm system
the main menu contains the most needed options
don't forget to support me for more video like & subscribe
the stay home option most commonly used when you are in the house whilst the alarm works under a different mode
history of the arm log or disarm log
wifi sync means - time and every other aspect is corrected by wifi net
same rules applied for GSM sync
timer - when turning on or turn off the alarm
depends on your habits I personally prefer these settings
mostly it's up to you guys
another important mode the passwords on the alarm
those are generic ones u have to change it
15 seconds is enough if the alarm is located nearby a mounted sensor
same for entrance or exit delay ...
just make sure when you insert the sim card the device should be turned off otherwise you have to restart it
after the restart, you'll have to wait for about 20sec to establish the net
the gsm network is shown at the left upside corner
dial to your personal number to make sure everything works in order
I memorized the number in the alarm as a home alarm
in order to activate the GSM alarm u have to insert the number in the system
as it shown
u can add up to 5 numbers
let's test it now
7sec need to receive the call from the alarm device
download this app
the app will ask to approve a few permissions
make an account
insert your wifi password
the alarm device and app will communicate via net
now the alarm is wifi connected
if doesn't shown on the app just follow the steps
set the mode don't to forget to add or change the number of the sensor
the door sensor has about 10m wireless range with obstacles
the remote has a decent range of about 30meters with obstacles
there is a hole in a door sensor if u want to add a charger 3v instead of a battery
also this sensor has a quite good wireless range
more range than the door sensor
restarting the alarm takes place in a few phases
deleting of the sensors from the alarm device
don't forget to delete the number and story log
really bothers me that its non-space for USB, siren wire and quite difficult to reach the turn on/off switch
really smart solution - if u remove the tamper(where is mounted the alarm unit) the alarm will trigger immediately
for other info check the user manual