Once the waterproofing is complete, the grate assembly, optional system
profiles, and tile can be installed. The Schluter-DILEX-EKE profile can be installed
at inside wall corners and the tray-to-curb transition to eliminate sealant joints.
Schluter-SHOWERPROFILE system profiles are elegant solutions for finishing the area
between the shower base and first course of wall tile in applications incorporating KERDI-LINE.
The SHOWERPROFILE-R two-part wall transition profile can be used to
cover the exposed area where KERDI-LINE is installed adjacent to the wall.
The SHOWERPROFILE-S tapered profile matches the slope of the shower tray and eliminates
angled cuts to simplify tile installation. Install the first course of wall tile making
sure to use an appropriate sized notched trowel for the tile format. Back butter
the tile as needed to achieve full coverage. Make sure to leave space for the System Profiles,
if used, that will be installed between the tray and the first course of wall tile.
Select the SHOWERPROFILE-R according to the height and length of the wall area to be covered.
Remove the protective foil and cut the profile to length. The Schluter-PROCUT-TSM cutting wheel
can be used with an angle grinder set to low speed to cut the stainless steel profile. Please
read and follow all safety instructions from the grinder manufacturer to prevent injury.
Connect the two components of the SHOWERPROFILE-R
and set at the desired height. Small pieces of tape can be used to
help maintain the position of the components during installation.
Apply a sufficient amount of thin-set mortar to the fleece on the back side of the profile,
and set the profile into place such that it is flush with the tiles.
Immediately clean away any excess setting material.
The grate frame is installed next. The installation process for Grate
Options A and B are the same. If Grate Option D is used, please refer to the “KERDI-LINE Tileable
Covering Support” video. The grate frame is set in
conjunction with the surrounding tiles. Apply unmodified thin-set mortar to the
underside of the grate frame along the back and sides and place it into the channel body,
ensuring full coverage and support. Insert the foam spacers into the
grate frame to reinforce it during the remainder of the tile installation.
Insert the height adjustment spacers under the tabs along the inside of the grate frame.
Adjust the frame to be flush with the tile by turning the
bolts that raise and lower the spacers. Fill the front side of the grate frame with
thin-set mortar. Full coverage of thin-set mortar under the grate frame is essential.
Immediately clean away any excess setting material from the surface of the grate frame.
Select the SHOWERPROFILE-S according to the thickness of the tile to be
installed on the shower base and the height and length of the wall area to be covered.
Measure the height of the wall area to be covered at the curb.
Mark the tapered stainless steel profile at the corresponding height.
Next, measure the length of the wall area to be covered.
Transfer the measured length to the profile and mark where it is to be cut.
Cut the stainless steel profile to length from both sides.
Snip the U-shaped support section to length Place the tapered profile into the U-shaped
support section and apply unmodified thin-set mortar to the fleece on the back of the profile.
Press the profile into place and align it flush with the wall tile.
Immediately clean away any excess setting material
Install the remaining tiles on the shower base and curb. Be sure to use an appropriate
sized notch trowel for the tile and back butter the tile as needed to achieve full coverage.
Make any final adjustments to ensure the grate frame is flush with the surrounding tiles.
Schluter-Systems offers everything needed to create a waterproof, vapor-tight shower assembly.
The integrated Schluter-Shower-System eliminates leaks, reduces the potential
for efflorescence and mold growth in the system, and dramatically reduces
installation time to ensure success and make shower installation easier than ever.