this will be set up of the vava cam pro and the base station for it utilizing the handy included
pamphlet so step one is to connect the base station to the power supply and the ethernet cable
the ethernet cable that they provided is actually very generous in length as a cat6 cable so we're
just going to come around here and we are going to locate the lan port we'll put that right in there
and then the power supply again utilizing the included power cable which is a little short based
on where my wi-fi router is so we're just going to have to push this over here and plug it in
and hopefully you can see that there is an orange light on the back now
and step two it says to turn on your camera it's actually a power button right there so we're gonna
press on that and try and make sure one more time
oh there we go there's a blue status light
so it does recommend charging this for the next step however since i have power what i'm going to
do is i've already downloaded the app i've already downloaded the app and next step is to add device
so first things first we are going to add a base station and then it's going to give us
the directions that we kind of just did which was connect the base station so we're going to
scan the qr code under the base station or we can press the sync and reset button to pair it
so in my case what i'm going to do is i'm going to scan the base station and here it's telling me
make sure it's powered on it wants to use my video recording so we're going to say only this time
so that it can activate my camera and i'm just going to kind of do this around the side here
and hold that off to the side and select next so it had the possibility of naming my base station
i didn't want to now it's telling me to pair the base station so pressing and holding the
sync and reset button under the base station simultaneously until the led uh okay so we're
gonna do that and hit next oh so okay apparently i cannot hit next until i actively do that timed out
oh and that was the camera telling me that the pairing had timed out so we're going to do the
back of the base station and hold the two there we go i was looking for that light based on the
visualization there so it is blinking we are going to hit next and congratulations it's paired to the
app so we're going to hit ok we're going to plop that down for the time being so we've got our
base station assigned so next we're going to say add a camera and all right turn on
the camera plug in the power adapter okay so and hit the sync button so hopefully
we can just come around here again and turn it on until we see that blue indicator light
there's our blue indicator light
which is going to in signify our pairing all right press the sync button to pair with the base
station wait for pairing we're going to try adding now to connect the camera press power buttons and
the camera turns on okay so we're going to hit next it's within short distance press and hold
the sync button under the camera until the led flashes and we will see if that pairs
camera successfully synced with the base station all right and there's a name we're just going
to call it outdoor and hit next so there we go we've got our outdoor camera there is a firmware
motion detected all right so we're going to update this now and so obviously when you do
this they'll probably be a firmware as well it is definitely telling me that it's detecting motion
because i'm right in front of it but figure actually looking my record time about six
minutes to fully set this up uh minus having to download the app and set up a account and
that's also with trying to record and film and adjust lights so you'll be able to set this up
you'll be able to set this up in under 10 minutes and then probably an additional minute for the
firmware but i won't make you sit through that so that is the setup process of the vava cam pro
you