Hi, DIYers.
Joe here from Alarm Grid.
And today we're going to talk about how
and show you how to factory default an August Smart Lock.
Now, there isn't many instances where
you're going to want to do a full factory
reset on your August Lock.
But you may run into a situation where you need to.
What the factory default does is it's
going to wipe the lock 100% of all its settings.
So you will need to have it connected to a smart device
that you can access the app and get to the option
to actually do the reset.
But after you do this factory default,
it's actually going to break the connection with the app.
And it'll be as if the lock is brand new out of the box.
So if you do have this and you're using it
as a troubleshooting method, you will
need to reconnect to the lock with the app
after performing this process.
Really, because it's going to wipe all the information
from the lock, there's only a couple instances
where you're going to want to do this particular process.
One is, let's say you just want to reset the lock back
to its factory default before you give it out
to a new tenant or a friend or whomever else.
It'll be as if it's right out of the box.
Another thing you can use it for is
if you're having trouble connecting a lock
or it's giving you some errant behavior
when trying to interface with a Z-Wave controller
or in its regular operation and if you've
gone through the other troubleshooting steps,
the factory default can be a last Hail Mary
to try to get the lock to work before calling it a bad device.
Other than that, though, there isn't too many instances
where you're going to want to fully wipe
the lock, as a lot of the settings on the lock you
can control and configure through the app.
And as far as the Z-Wave portion of the lock goes,
you can actually just reset that particular portion of the lock.
So this factory default process, only use it as a last resort
if you're using it as a troubleshooting step.
Or if you're giving the lock to somebody else
or you're letting somebody else use it,
it would also be useful with that.
Just know that they're going to have to connect to the lock
when they get it or when you reset it up,
as factory resetting it is clearing it 100%.
It's as if it's out of the box.
So today, though, we do have our lock, August Lock right here.
We do have it connected with our iPad.
So on our iPad, let's go ahead and jump into the app
and show you how to perform this factory default.
I'm going to click on the August app and load up the app.
And then click on Alarm Grid Office, which is our lock.
I'm not going to calibrate it.
It hasn't been calibrated, because we just
have it sitting on the table.
So I'm going to click on Cancel.
And then I'm going to go to the gear in the bottom right.
I'm going to click on Lock Settings.
And then if I scroll down, you'll
see right there under Utilities, there's Factory Reset.
So I'm going to click on that.
It says a factory reset will restore your lock
to its original settings.
All current users will lose access to this lock.
So there's one final reminder.
As you can see when you do reset it,
it's going to clear everything off the lock.
So if you do live in a house with other people
or in a location with lots of people,
make sure everybody's on onboard before you do this,
because they're not going to be able to communicate or use
the lock after you perform this function.
So I'm going to click on Reset Lock.
And there you go.
The lock was completely reset.
And as you can see, it says, "Welcome to August."
This is the menu that you're going to see when you first
set the lock up.
So if we do want to continue to use this particular lock,
we'd have to reconnect it to the tablet and the app,
go through that setup process, and then
reconfigure it to do whatever we want it to do.
But that's how to do the factory reset.
It's not a difficult thing to do.
You just go to the menu and click the button.
But just be aware that this is what you
want to do before you do it.
And again, if there are other people living where you're
living, make sure that everybody knows
what you're going to do before you clear
the lock of all its settings.
If you do have any questions, though,
about the August Lock, connecting it
to an alarm system, performing the factory reset,
or other features you can use with the lock,
feel free to give us a call at 888-818-7728.
Send us an email to support@alarmgrid.com.
Or head to our website, www.alarmgrid.com.
If you did enjoy the video, feel free to subscribe.
And if you want to be notified when we post future videos,
hit the Notification button below,
and we'll send you an update when we do so.
Thanks for watching, and have a great day.