Hello boys and girls welcome to another day at Detail Garage.
I picked up this Smart Car from the dealership and I took it home when I noticed it didn't
look so hot.
I have a lot of holograms, water spots and even though it is a used car you still want
it to shine.
This thing has no shine to it, it actually has a lot of damage from poor detailing.
The easiest thing to do is a one step polish because I'm a busy guy.
To perform a one step polish we're going to use an Orange Hex-Logic Pad and VSS.
What does a one step polish mean?
It means one product, one pad to knock out this section repeating the same process over
the entire car to get the same result and a beautiful shine.
I'm going to show you a little two by two area to work this product in, which is VSS
for the day.
You're going to see a good before and after and how well we can get this car to shine.
To perform this one step I'm going to use some easy tools.
The TORQ X, an Orange Pad and VSS, that's it!
VSS is going to let me perfect the paint while duplicating the results on every panel.
Before I get started I'll lubricate my pad using Pad Conditioner.
After that, I will apply four dots to this pad, like so and I'll dab this out before
I start working.
The reason why I want to dab this out is because if I turn on the machine first it will fling
product everywhere which makes a mess and also makes you look unprofessional.
Nicely dabbed out and now on speed one I'll spread it out.
Also when spreading out product you don't need to add any pressure, you're just spreading
it out real quickly.
Just pretend you are spreading butter on toast.
Obviously this isn't toast and this isn't butter but you get the idea.
Next, I'll work this in on speed six so we will break it down til it has gone almost
clear before we inspect the shine.
We're using a Red Line Microfiber Towel and before we use any new towel make sure to always
remove the tag.
This makes sure you don't destroy the work that you just completed.
I'll buff all of this off so that we can see what is under here.
Lets remove this tape so we can see a definite 50/50
between the corrected area and the uncorrected area.
Keep in mind this is only a one step, so we only used one product and one pad.
As we can see after checking, we have a really good result after only one step.
Most one steps aren't going to remove more that 90% of the imperfections but I would
say at least 85% of the scratches, holograms and water spots have been removed.
With this one step I'm pretty happy so I'll repeat this over the whole vehicle to give
me a really nice shine then I'll throw on some wax so I'll be ready to hit the road
with a used car that looks really good.
So if you like this video give it a thumbs up, if you want to see more drop a comment
below to let us know what you'd like to see.
Thanks for tuning and I'm going home.