Hey guys, Mike from CCTV Camera Pros here. In this video, I'm going to show you how to
set up video motion detection using one of our Viewtron security camera systems. I'm
actually going to use that 4K dome camera that you see behind me, and I'm going to set
up an intrusion zone in front of our front door here so that when someone walks through
that detection zone, two things are going to happen. It's going to trigger a video recording
on the DVR, and it's also going to trigger a push notification to the mobile app for
iPhone and Android. I'm going to walk you through the setup and then we'll go through
a demo. To set up the motion detection on the DVR,
I'm going to bring up the Settings menu by clicking on this button and selecting Settings.
Under Camera, I'm going to click on the Motion link. On this page, I'm going to select the
camera that I want to set up the motion detection for, and I'm going to use this front door
camera, and I'm going to set motion to on. And then I can draw the motion detection area
over here with these grids. I'm just clicking and dragging with the mouse to create the
motion detection zone right now. And then I could adjust the sensitivity, but usually
the default is good, and that's something that you can adjust later. So I'm going to
leave the sensitivity alone. And then next, I'm going to click Apply and then click on
Processing mode. On this screen, this is where you can enable
the video recording. So I'm going to check this box and then select the camera that I
want to trigger recording on, which I'm going to trigger recording on the camera itself.
And then you can enable the push notifications to the mobile app over here by turning this
on. Once I'm done, I click Apply to apply those settings. And then last, I'm going to
click on this push notification link under Event Notification and make sure that this
push notification is enabled. And then you can set a schedule. I have it set to 24 by
7, but you could use any of these schedules or set up a custom schedule. When I'm done,
I X that out and I'm back at the live view of the camera we're going to use, and the
setup is now done so we'll do the demo. I'm going to pull up my iPhone screen and
put it over here on the left and open up the Super Live Plus app. I'm using the Office
NVR, so I'm going to tap on Office NVR, and you need to make sure that the Enable Push
Message and Message Subscription radio buttons there are on. And then I'm going to go back
to the live view. And then I'm just going to close out the app. So in a minute you'll
see me walk out the front door, and when I do, you'll see that the push notification
was triggered on my iPhone. And I'm going to tap on that alert message, and that's going
to automatically open up the Super Live Plus app. And then I'm going to tap on the play
button on that motion alert screen, and that's going to bring up the event that occurred
and start the video recording playback in the app. So there I come walking out the door,
and this is the recorded video playing back from the recorder to the mobile app.
I hope this video's been helpful. I want to mention a couple things before we wrap up.
The setup for the video motion detection and the push notification is the same both on
Viewtron B and C camera systems and DVRs, as well as IP camera systems that use NVRs.
Now, let me mention one other thing. If you're going to use an IP camera system that includes
our AI cameras, you would do object detection instead of video motion detection. This video
covered video motion detection that does work with both the B and C cameras and the IP cameras.
Not all of our IP cameras have AI, but if you go with the AI IP cameras, you'd be using
object detection instead. If you have any questions about any of this, feel free to
reach out to me anytime. I can be reached at mike@cctvcamerapros.net. If you want to
see some additional videos and learn more about these Viewtron security camera systems,
please visit www.cctvcamerapros.com/Viewtron. Thank you for watching.