Welcome back and thank you for checking out this latest video
brought to you by RealPars.
If you are watching this video, then you are probably wondering
what exactly is a pressure sensor.
Today, we will hopefully cover all of the questions you may have
about pressure sensors.
before we get started on today's video
if you love our videos, be sure to click the like button below.
then make sure to click subscribe
and the little bell to receive notifications of new RealPars videos.
This way you never miss another one!
To understand pressure sensors,
first, you need to understand pressure.
Pressure is an expression of force exerted on a surface per unit area.
We commonly measure the pressure of liquids, air, and other gases,
amongst other things.
The standard unit for pressure is the “Pascal”.
This is equivalent to one “Newton per meter squared”.
A pressure sensor simply monitors this pressure
and can display it in one of the several units known around the world.
This is commonly the “Pascal”, “Bar”,
and “PSI” or pounds per square inch in the United States.
The pressure of the air in your tire is a great example of pressure
and how it is measured.
As we air the tire up, the force it exerts on the tire increases,
causing the tire to inflate.
This is monitored with a pressure sensor inside the tire on newer vehicles.
So how does a pressure sensor work?
In a nutshell, it converts the pressure to a small electrical signal
that is transmitted and displayed.
These are also commonly called pressure transmitters because of this.
Two common signals that are used is a 4 to 20 milliamps signal
and a 0 to 5 Volts signal.
Most pressure sensors work off of the piezoelectric effect.
This is when a material creates an electric charge in response to stress.
This stress is usually pressure but can be twisting, bending, or vibrations.
The pressure sensor detects the pressure
and can determine the amount of pressure by measuring the electric charge.
Pressure sensors need to be calibrated
so it knows what voltage or milliamp signal corresponds to what pressure.
This is a basic “Zero” and “Span” calibration
or minimum and maximum
which is a common job for maintenance personnel.
In the RealPars video
“What is Sensor Calibration and Why is it Important?”
we described the sensor calibration in detail.
What are some of the common types of pressure that you can measure with a pressure sensor?
There are three common types that we use in the industry.
First being “Gauge Pressure”.
This is measured in reference to atmospheric pressure
which is typically 14.7 PSI.
You will show a “positive” pressure when it is above atmospheric pressure
and a “negative” when it is below atmospheric pressure.
The next type is “Absolute Pressure”.
Simply put, this is the pressure as measured against absolute vacuum.
A full vacuum will have an absolute pressure of 0 PSIa
and increase from there.
If you need to read a pressure that is lower than atmospheric pressure,
this is the type of sensor you would use.
The last type that is commonly monitored in the industry is “Differential pressure”.
This is exactly what it sounds like, the difference between two pressures,
a pressure being measured and a reference pressure.
In industry, pressure sensors are used for a wide variety of processes.
Some common uses are to measure the pressure of steam.
Steam is commonly used to heat many processes in manufacturing facilities.
This pressure sensor on the steam system can serve multiple purposes though.
First and most obvious is to observe and monitor the pressure.
Another purpose is to control when and where steam can flow
and regulate its pressure.
Steam can build up a pressure in a vessel and become dangerous.
We can use the pressure sensor as an input device
to open and close a control valve
to keep the pressure and steam flow regulated.
This only requires simple programming in the PLC to achieve this.
Pressure sensors are also installed next to filters in many industrial processes.
If the filter begins to clog, the flow will decrease.
As the flow of the liquid decreases,
pressure can increase or decrease depending on which side of the filter is monitored.
If you monitor the pressure, it will give you a simple indication
that the filter is clogged and needs to be cleaned or replaced.
A common use that isn’t as obvious
is the use of a pressure sensor as a level sensor.
In an open tank,
you can use the hydrostatic pressure that is measured at the sensor.
With a little math,
using the size of the tank and specific gravity of the liquid,
we can determine how much of that liquid is in the tank.
If the tank is closed, it isn’t as simple of an installation.
It is still a viable option though.
This will require at least two sensors to measure differential pressure.
The high-pressure sensor would be located at the bottom of the tank
measuring the liquid pressure
and the low-pressure sensor near the top measuring the air pressure inside.
A calculation can then be performed to figure out how much liquid is in the tank.
Let's take a look back at what we have learned.
Pressure is an expression of force exerted on a surface per unit area.
The standard units are the Pascal, Bar, and PSI or pounds per square inch.
Pressure sensors convert the pressure into an electrical signal
that can be transmitted and displayed.
This is why many sensors are referred to as transmitters.
These sensors commonly measure Gauge Pressure,
Absolute Pressure, and Differential Pressure.
Gauge pressure is measured against the atmospheric pressure,
absolute is measured against a vacuum,
and the differential pressure is the difference between two pressures.
Pressure sensors are commonly used
to monitor pressures in different processes.
A common thing to monitor is steam pressure.
That pressure sensor can be used to control a valve
to keep steam pressure at a constant level.
Another common but lesser known use
is to monitor the level of a liquid in a tank.
Filter clogs are a common use of differential pressure monitoring.
By knowing the pressure before and after the filter,
you can determine if it is clogged.
Thanks for watching another RealPars video!
I hope you learned about Pressure Sensors.
Check back soon to find out how to choose a pressure transmitter!
Want to learn PLC programming in an easy to understand format
and take your career to the next level?
Head on over to realpars.com