Hello everybody 'Lurgs' here welcome to my channel and today the LAY-Z-SPA keypad and how to use it
I'll take you through all the buttons and what they do right let's get cracking well in a minute!
Just a quick tip if it's a baking hot summer's day be careful when you're running
your unit with the heater and the filter on because the unit could actually overheat.
This is the keypad here which folds down and you can just fold it up so it faces you whilst
you're in the LAY-Z-SPA now the display on this keypad is not the easiest to see especially if
you've got strong sunlight so you may want to just put something over just to put it in the
shade. [Star Wars skit] This LAY-Z-SPA claims to be the property of an Obi-Wan Kenobi. Strange,
don't seem to ever remember owning a LAY-Z-SPA before, but the force is strong in this one.
Ben...Ben. Make sure the unit is plugged into the mains and you press this orange button to turn the
power on I'll take you through all the buttons and I'll do the timer ones at the end because I barely
use them to be honest. To activate the keypad hold and press the power on button in the middle
this then lights up and the water temperature is currently 21 degrees centigrade now you may
find after three to five minutes the keypad will lock itself you can manually lock it but
just remember if you come to do anything on your LAY-Z-SPA and it seems like the keypad
isn't working it's probably because it's gone into automatic lock mode, so always remember to unlock
it. These up and down arrows are how you set the temperature of the water inside your LAY-Z-SPA
you can just scroll up, if you hold it down it scrolls through faster or you can just tap it and
it goes up in one degrees, I've set the desired temperature to 35 degrees centigrade and you've
got these two buttons at the bottom this is the water filtration system and this is the heater
as soon as you put the heater on the water filtration light comes on because that means it's
filtering the water if you put your hand inside the LAY-Z-SPA you should be able to feel the
hot water coming out through this jet here, great stuff. At the moment the heater icon is red which
means it's heating the LAY-Z-SPA and the current temperature of the water is 23 degrees centigrade.
If I then lower the temperature eventually the
heater icon will go green and that means that it has reached the set temperature that you've set
And now if I scroll it back up because I want it hotter you'll notice the heater icon has
changed back to red which means the heater is now functioning, in the middle here you can change the
temperature display to centigrade or fahrenheit, just push it once it shows in fahrenheit push it
again it shows in centigrade. And at the top that is the current temperature of the water,
this button at the bottom is for the bubbles, try saying that three times! Don't ever put the
bubbles on if the cover's on because it can damage your LAY-Z-SPA but just bear in mind
if it's a freezing cold day in the middle of the winter it is pulling air from outside those
bubbles are going through your LAY-Z-SPA and that will cool down your LAY-Z-SPA
significantly, it's not too bad in the summer. If I now set my desired temperature much lower
so that then it's reached the desired temperature
and we'll notice again that the heater icon turns green you can actually turn the heater element off
and just have the water filtration system running so if you're in your LAY-Z-SPA it's a nice warm
day you may not need the heater to actually be running just going to set the temperature
up again to 35 degrees centigrade put the heater back on and you'll hear it fire up,
I've left the LAY-Z-SPA for a few minutes and you'll notice that the keypad is locked with
the padlock icon so just always remember to unlock it by holding that unlock button for two to three
seconds what I'll show you now is how the timer actually works now don't ever be tempted to use
your own timer on the plug because once the power goes off on the Bestway LAY-Z-SPA it
trips the little unit here and then there's no power to it at all so a timer plug will not work.
The timer button has got two stages setting the heating duration and then setting the number of
hours from now when the heater will activate, so press it once and this sets the heating duration
then press the button to select the number of hours that you want the heater to be on
I'm going to set it to 12 hours press the timer button again and this is to select the number
of hours from now when the heater will actually switch itself on if you leave that flashing for
about 10 seconds then those settings will be saved so this will come on in 6 hours and stay on for
12 hours after it is set the screen will flash the current temperature and the time alternately
If you then decide that you don't want the timer anymore you want to cancel it
just hold the button on the timer button for 2-3 seconds and that cancels all the
settings that you've just made, it's a good idea when you're heating your LAY-Z-SPA to
put the cover on this just helps it heat up quicker unless of course it's a baking hot day
I tell you what that deserves lovely cup of tea!
And then it's time to actually enjoy the LAY-Z-SPA oh, superb, time to relax.
I hope you found that useful up here is a link on how to change your filter on your
LAY-Z-SPA and over on this side there's a link on how to clean your filter on your LAY-Z-SPA
that just makes it last a little bit longer thanks for visiting my channel. 'Lurgs'.
you