Music on...
Welcome to Simple Paper Aircaft
today and show you how to make the Nighthawk, one of my newest paper airplanes.
This one is a glider and it
flies pretty good! so lets start now.
You nee a printing paper to make the Nighthawk.
and I recommend
to use letter size
First step fold the paper in haft this way
...
Next step, fold the
paper in haft again, I start from this edge fold it to this edge.
...
So that is what we have so far. Turn the paper this way.
Now start from this edge, fold it to the center crease.
Then, I repeat the same step for the other side.
Kay, and I open
open this part, and this part. Then I turn the paper over
( fix the crease first...)
Start from this edge, to it to the center crease again.
Repeat the same step for the other side
Alright, I open this part, open this part.
As you can see, I have 2 layers here, I open it
I start from this edge, I fold it to the center crease.
like this.
Here we go, I repeat the same same for the other side.
Next step, I start from this part
fold it to the center crease.
okay so next step, Start from this
this layer, and fold it to a side
and I just fold ths part up
I just fold this layer to this layer.
...
this is what we have here.
...
Ok, start from this edge, fold it to the center crease.
...
But I will not fold it straight to the tip here
I just estimate about 1/4 of an inch from this tip and this edge
I will
repeat the same step for the other side.
Okay!
and then, I open the paper.
See what I have here. I have a crease here. Then,
I start from this edge fold it to this crease.
...
'right! I will repeat the same step for the other side.
Okay, so that is what I have.
Next step,
Fold the hold part
of this layer to the center crease
Now, start from a..
this part here,
just fold this part down
to the intersection of the center crease and this edge
Repeat the same step for the other side.
Here we go!
This is what I have so far. Then I turn the paper over.
Then, I start from the tip here. I fold
fold to this edge
...
Push it down alright!.... Next step,
use the intersection of this crease and the center crease as your reference.
...
Fold it diagonally to this point.
this crease about
1/4
of an inch. Then, I repeat the same step for the other side
Push it down.
Alright...
Repeat the same step for the other side.
You can use
this crease and the center crease as the reference.
This crease match with
this crease ( crease on the wing)
As you can see
Fold it right here.
...
Ok, so this is what I have. I will use both hands to fold
these edges in.
...
You see the triangle shape here, just fold it to the left side
then fold it to the right
Then, I open this triangle shape. Push
it down.
...
So, this is what I have for now.
Next step, I will crease the body part of the plane.
You see these two parts, just push them down.
like this...
And I use, I use one of my finger.
My thumb to hold the top.
This...
is about 1 in
This is a hard step!
so, be patient
Just fold it down like this.
...
This part is really hard.
...
I will leave a bout 1/4 of an in from this corner
to the gap.
Just fold it down.
It is less than an inch
so, this is what I have.
Okay, next step, I will fold
this part of the wings up.
and then, I repeat the same step for the other side (of the paper).
Fold this part of the body up.
and I push this nose in hard.
to create a sharp edge
The Nighthawk is almost done. Next step,
we need to create a stabilizers.
So, I just fold this part up
Okay, like this!
and .. I repeat the same step for the other side.
Okay!!
Next, I will fold the edge of the wings up about
1/4 inch of the wings a little bit to create the stabilizers
to balance the airplane.
Just a little bit
3 millimeters up.
I just fold this part down a little bit. And this is very important step..
you need to do to make the airplane
flies it to make the elevators
Just choose a part of the wing that close to the body
part and fold it up a little bit.
Repeat the same step for the other side.
Okay!, so
[... Music is on]
Okay, so here is the Nighthawk
and if you think this paper airplane is awesome, and like it
Please, give the video
a thumb
up, and thank you for watch!
Bye Bye!