If you got an iPhone from your family,
or purchased it from someone else,
it could still have the previous owner’s Apple ID on it.
With find my iPhone enabled,
you’ll need to password to sign out,
or the phone number to reset the account.
What if they forgot all of the information?
When the Apple ID gets locked,
Is it still possible for you to unlock it?
Thank God, the answer is yes.
In this video I'll show you how to pull it off.
Let's get started.
The tool we are using here is 4MeKey.
I’ll leave the link in the description down below in case you want to download.
Before we start, make sure to disconnect the phone from the network.
Then plug the phone into the computer.
Now go to the Turn Off Find My iPhone field.
Click on start and agree to the disclamler.
4MeKey will download the jailbreak tool first.
Now insert an empty USB thumb drive into the computer.
Once detected, click start to create the jailbreak drive.
Once done, you’ll see the guide showing you step by step
how to jailbreak an iOS device on Windows.
You can also scan the QR code here
to view the instructions on your other mobile phone.
Ok, now we are going to reboot the computer.
When it boots up, press F12 to enter the boot option.
then boot your computer from the UEFI hard drive.
Now we should see the checkrein jailbreak wizard,
make sure your iPhone is still connected at this point,
then you should see the device information right here.
It says the iOS is not supported at this point.
No worries, we should head to the Option first,
check off allow untested iOS and skip A11 BRP check.
then go ahead and quit back.
Now it says iPhone is only partially supported.
that's fine, let's proceed.
The device will be put into recovery mode first,
press next to confirm.
Once in, press start,
then quickly follow the instructions to put your iPhone into DFU mode
before the countdown is over.
For an iPhone 10,
is press and hold both the side and volume down button for 4 seconds,
then let go of the side button
but continue holding the volume down for another 10 seconds.
Once in DFU mode,
you’ll see the jailbreak code running on your device.
Well done, now let’s reboot the computer,
and open 4MeKey to start over.
This time you’ll get right to the device information page.
Click on start to proceed.
Well done, now it says find my iPhone turned off successfully.
Let’s proceed with the FMI status verification.
Copy the serial number,
then click on verify the FMI status.
Now paste the serial number into the search bar,
and click on the search button.
As you can see, the Find My device service is off now.
Now enter the result in 4MeKey.
Then hit continue.
You iPhone will be restored to factory settings.
We have backed up this iPhone, so we confirm with a Yes.
Ok, now that we see the hello screen,
let’s go ahead and set it up.
When we see the Data and Privacy option,
We know the the Apple ID has been unlocked.
Let’s move on.
Once you get to the home screen, in Settings,
You’ll notice the Apple account has been signed out,
Now you can sign in with a new ID or leave it as that.
That's it!
Thanks for watching.
I hope this video helps you guys.
Have a nice day.
See you in the next video.