The Pioneer Digital DJ SP1 is our first ever add-on controller designed for Serato DJ.
And for the first time Serato DJ has added support for their NoiseMap Control Vinyl and CDs.
Making it possible to combine the feel of vinyl and CDJs with the endless creativity that controllers introduced.
The SP1 takes your current DVS or controller setup and gives it the top performance features from the DDJ-SX, in one compact unit.
Designed for portability, the SP1 has a rugged build with an aluminium faceplate and requires only one USB connection to get going, so its perfect for gigs and clubs.
The SP1 has a simple layout that is easy to navigate.
The left and right sections both have the same controls for each deck.
This includes the same 16 velocity sensitive pads found on the SX.
When used with the sampler, they allow for truly expressive hands-on performance.
You even get a dedicated sampler volume fader in the centre for levelling it in to the mix.
As well as the sampler, use the pads to trigger hot cues, engage Loops, Loop Rolls and remix the track using the Slicer function.
Just above the pads you have a sync button to lock the BPMs of your mixes.
The slip button enables you to use all of the features of Serato DJ but never lose your track position or timing,
You also have a censor for reversing the track momentarily, plus Auto-loop and loop parameter controls here.
Serato DJ comes with a wide range of effects developed by iZotope and these can be fully controlled by the two FX sections.
You get a level/depth control for each of the three FX, and a beat timing control.
And each effect can also be triggered using the individual on/off switches.
In the centre you can individually assign the FX, and performance controls to any of the four decks.
This is also where youíll find the browse controls where you can load tracks to the selected decks.
The SP1 is also the first controller to have a dedicated Serato Video Control Mode, allowing you to add FX and transitions during your mix.
The SP1 can fully integrate with any Serato system.
Use your existing soundcard and DJ set up to get your music going through the speakers and then use the SP1 to perform.
You can use it with DVS, CDJs with control CDs, or an existing controller.
Take it one step further and combine the SP1 with our new SRT mixer, and you donít even need an additional soundcard as the SRT has one built in.
You could have the simplest DJ controller and combine it with with the SP1 to have access to the most advanced features on the market.
And if that wasnít enough, it works as a MIDI controller, so you can use it with any MIDI compatible software.
Thereís even a TSi file for use with Traktor.
So whatever kit you have, the SP1 will fit in perfectly.