Hello. My name is Ted. I'm an SST with the Systems Management Group
at Dell EMC, and this is the video regarding the deployment of ISOs
using OpenManage Integration for VMware vCenter or OMIVV.
We're going to go over the process here, first thing is to log into our vCenter.
Once we get logged into vCenter we're going to go to the OpenManage Integration plugin.
I do have a target server discovered here in bare metal that I can use to deploy.
So if we click on that we'll notice that we are missing an ISO profile,
for me to deploy the operating system I'm going to need to create an ISO profile here.
We can do it right here from this wizard, it's going to present us with the option.
Let's go ahead and provide an image location, got that over here on my clipboard.
And provide a username and password,
and then select the version of ESXi. We can test to make sure that the ISO is going to work, we
get our success, and we'll finish adding that ISO. Then we can complete the deployment process. Here,
let's go ahead and start, here select our server to deploy, then we are selecting the ISO profile
and where we're going to put the server. When we're done
I'm just going to put it here in the lab, in my vCenter, and let's see the ISO.
Then we're going to select the boot device that we want to apply this to,
and I'm also going to deploy the hypervisor to the first boot disk.
So this is specifically if we do not have an internal Dual SD Module or IDSDM
or BOSS you can deploy this to that first first hard drive.
It gives us a warning that all data on the disk will be erased. I'm going to click 'Next',
we're going to choose to use the same host credential profile, I'm going to provide
our lab profile here along with a password,
and we're going to go ahead and click 'Next'.
And then here we apply our settings, we're going to give it a name
and tell it which network connection to use.
I'm not going to use a VLAN, we can provide an IP address here if we like,
if we're going to specify that. For this example I'm just going to use DHCP
and then we're going to give it a name, and tell it to run now, and then we'll go ahead
and view that job. Immediately after this is complete deploy OS process is started. This
process will take a little bit of time to go ahead and reach out to the iDRAC and actually deploy
the ISO. It will boot from the ISO and start deploying the operating system automatically.
It's important to note that OMIVV does leverage a kickstart file for this deployment process.
So if you're using a custom image that you created with the VMware tools that
also leverages the kickstart process, that ISO image will fail to deploy because the conflict
of the kickstart process that OMIVV uses in the kickstart process from the custom created ISO.
And if we refresh there we can see that the status is in progress. If we want we can pull up
the iDRAC and view that as well to watch the boot process of the iDRAC through the virtual console.
The iDRAC is, the server is booting right now and the servicing partition has been
requested by the lifecycle controller. As this process is still ongoing
we'll watch it boot and deploy the operating system here
to verify that everything went well with our configuration settings.
Once the host OS deployment is complete and the kickstart process is completed we will see these
new tasks in our vCenter, where the host is added to vCenter as we directed,
and we will see the completion of this job in our OMIVV console.
Now that our host has completed booting it should be added to our vCenter. We can confirm this
by looking at the task progress. We'll see some tasks kicking off here,
but we can also check and make sure that it is now added to vCenter on our host tab.
There's our add standalone host process, and we can see that the host is popped into vCenter here.
Again in OMIVV we can see the progress of this task.
Now that all of our onboarding tasks have completed
we should see the status of this move to the completed status as well.
There we can see 'Successful' on refresh and we can also verify in our vCenter under 'Hosts'
that everything is healthy and our host is currently in maintenance mode
awaiting any further configuration that is required.
Thank you so much for watching this video and I do hope you have a wonderful rest of your day.