Hi, this is Jay P. Morgan. Today on The Slanted Lens we're going to take a look at how to get
great long-term time-lapse. What do I mean by long-term time-lapse? Things that take longer
than a couple hours to accomplish. Things that take months or weeks to accomplish like building
a building or repainting a car or refurbishing a car. SKB Cases has been my client for years. They
asked me to do time-lapse of this installation of a new machine for them here at the company.
So I came up with a couple of solutions to be able to give myself several angles to be able to
get that long-term time-lapse. Let's look at the settings. Let's look at the cameras. Let's look at
how I rigged them. So let's get started and see what we can do. Let's take a look at long-term
time-lapse. So this is an SKB case. Basically I took a PVC pipe, I cut a hole in an SKB case,
I glued or siliconed that piece of pipe on there and then I glued a filter on the front of it.
So with that filter I can keep all the dust out of here. I mounted an aftermarket arca-swiss plate
there so I can just slide my camera in and out. I got a little intervalometer here that's velcroed
into the back of the case. That's going to take a picture for me every one minute. Right now I ve
got it just set up with a dummy battery that goes to an ac unit which is outside here and then that
ac unit is plugged into the wall back there so I can have continuous power forever. I do run it on
aperture priority. So I m doing this at, I m not quite wide open. It's like f/3.5 because the light
changes in here. There's sunlight coming in from outside. They use different work lights. I mean,
all those things change. I know I ll have to de-flicker this when I m done because anytime
you use any kind of an automatic mode when you're doing time-lapse the exposures are
not close enough to each other that you get a flicker. But there s de-flickering software out
there by Granite or other companies that make it very easy to get rid of that flicker. It's
just a quick run through the software and your de-flicker is ready to go. It's just a great way
to give yourself a way to get a DSLR or mirrorless camera into a case that is air and water tight.
And with the power option it just makes it so this thing will run forever, as long as you
have space on the card. So let's take a look at some of the time-lapse from this position.
The second option and absolutely the easiest option is some kind of a long-term time-lapse
camera. Afidus, and I don't know if I say that right, but they make a great camera. I think it's
the best one on the market right now that will take and string together the images into a video
clip. So it's constructing the time-lapse inside the camera. It has a de-flicker mechanism so it'll
take some of the flicker out of it. It just gives you a finished piece. It definitely gets dusty up
there. It's been up here for actually a couple of months now. It runs on four AA batteries. I trade
these out. These four batteries should run you for a month easily and actually longer if you look on
their website. It runs with a small card in the side here. So it's going to be a small SD card.
I run a 64 and that 64 gives me plenty of time. I can leave this up here for three weeks without
any problem. And it's just stringing the video together as it goes. The way I set up all these
little cameras is with the Platypod. I either have an Ultra or I ve got the Max. And I just shot them
into the beams and things or strap them around a pole. The Platypod plate just makes it very
easy for me to get these in different places, with a head on it so I can adjust them to get
the view that I want. That just makes it really turn key. But that's what all these are on.
So I m going to go into the settings mode. In settings I m going to just simply find the camera.
There's the camera. I m going to connect to that in settings with my wi-fi connection. Now I ll
just simply go to the app. In the app I can hit camera. And there I am up on the lift and there's
Julene in the background videotaping away. In here now I can just come into my camera settings
and this is where I have all my options. I ve got it on an SD card. I ve got the lens calibration. I
ve got the wide angle off. I can come down here to my scheduling. I ve got it scheduled Monday,
Tuesday, Wednesday, Thursday, and Friday from 6am to 6pm. Video lapse length is at 10
seconds. I want them as long as I can get. Now when I hit down here record,
I m going to do a time lapse there, it gives me all my settings: 30 frames a second,
six to six Monday through Friday. Hit okay, and when I hit okay there s a little beep, beep and
it's ready to go. It s easy as that. At that point I can just simply go on to the next one. I have
three of these little cameras set up here at different angles. So I ve got an angle here
looking right down the pit. I ve got a cross angle and I ve got a reverse angle. I have one a little
lower so it's down below the beams here and all of this mechanism that's running back and forth.
And I ll just play with that, you know, so I have the option to see which one I like the best.
And I can use those and cut those intermittently with each other. This is going on, this time lapse
here, is going on for now three months. So it's been a long process. I m coming out and changing
cameras. I m getting a lot of footage. I got to boil that down to a three minute time lapse of
this whole machine being put together with four different cameras. So it's kind of involved.
In this setup I ve got the Afidus camera on a Platypod Ultra. I just strapped it around the pole
here. So I can get a shot right down the alley here of all the work they're doing on the machine.
Again that's a really simple setup there. It's the Platypod Ultra. We've got the Benro head and the
strap around the pole that I can move up and down. It worked out really well. One thing I forgot to
talk about is the intervalometer. I put it on a one minute interval that gives you 60 frames per
hour. And that means that's two seconds per hour. So you get about 20 seconds of video
in a workday. So I think that gives you a great time frame to be able to work with. It's going to
look a lot better on the timeline and give you more options when you get into the editing.
So I ve been coming out every two weeks to check on the cameras just to put new cards
in the cameras and put new batteries in the Afidus cameras if I needed to.
And just make sure everything's working. I moved them a few times when I had to change
the view like when this structure came up for the crane it blocked one of my cameras. So I had to
slide it down the pole. So it just made it so I had to change things up as I went along. So you
can't just walk away. Actually, the Afidus camera, if you get it in the right position
and it's like looking across the street at a building, you can just let that run,
you know for a month. So there you have it, a look at long-term time-lapse. It's a really
fun thing to do. It's something that's just nice to set up and be shooting all the time
watching the snow pile up, you know watching the house be built, looking at something happen
long term. It can even be the flowers coming on as they come up and blossom. A special thanks
to SKB cases for providing the case, providing the factory and just letting us come out here and do
a long-term time-lapse. It's been a lot of fun. So keep those cameras rollin keep on clickin .
I think my SKB case is about to fall out the window.
Yep our Rebel T4-i is absolutely dry and still looking good there. On to the next job.
We're still recording we're still good.
So there you have it, the camera's still rolling and it's working fine.
Let's see if our camera's still rolling. It dropped about 12 feet on to the side.
It is still rolling. This thing's been dropped about eight or ten times now
in this case. This camera's doing great. It still survived. This case
might just fall out the back of our van. Sometimes that's been known to happen.
My SKB case fell out of the back of the truck. Is it still working?
Yep, still recording. The camera s working just fine. So there you
go, it fell out of the back of the truck and it's working just fine!