know there's also a filter in here i'm going to show you how to change those right now so
we'll clean them first one we take this out need to get a small flat head screwdriver
we're going to do is sorry i've done this plenty of times before flip it just under here
try this up like that and then once you remove this you'll see in here this one's quite clean
but normally these are very full of gunk clean this right out once this is clean and dry put
this back on this will stop your dyson from pulsing if your dyson is pulsing that's normally
the problem it is an indicator that the filter is clogged and the motor is pulsing because you
can't get enough air over it to keep the motor cool so now i'm going to show you how to change
the or clean the filter in the back here for this you're going to need a small phillips screwdriver
there's one small screw here this is the battery retaining screw
make sure this is undone properly
with that one done you should then be able to remove the screw
with that screw removed get a small flat head screwdriver and you can just see
here we're just going to place this screwdriver in here
very carefully there is a small tab just inside here and you will see it in just a second
and with that tab undone we can now work our way around the
back
just put this down what i'm going to do is just work the screwdriver around
let me get a better tool for this
i'm going to use a plastic pry tool much better
and the second you will see this will just pop there we are
once you've got that done and there we are there is your second filter that you need to
clean as you can see this one is extremely dirty there's actually two filters just inside here
and you will see in a second that's how dirty
that one is all you need to do is just wash these out in water
and there you go so that's the second filter in the back of the dice and you need to
to clean and what i'd recommend is getting yourself a paintbrush
a dry paintbrush and in the back of here you see how much dirt is actually inside here
you really need to give this a good brush and just get all of that dust off
the air actually blows out from under here on the back of the dyson
around here so if this is clogged and the front one is clogged that's why your dyson will be
pulsing everyone tells you about cleaning this one um but nobody ever tells you about cleaning one on
the back here and then you can see just how much dirt is in the back of this so all you need to do
is wash this out in water and wash this out in water wait till they're dry
give this a clean you can put this uh in the water as well so give this a wash or brush it
out with your with your paintbrush and just get all that dust out before you reassemble
and you can reassemble your dyson and it should stop pulsing the other thing you can do
i'll show you another trick you can pop the bin off double click the bin
you can see just inside here see this little white tab if you get your screwdriver and just
push this tab in once you push the tab in push on the side of the dyson and again on the other side
you can then remove the actual filter from here you see how it's just come
off and you can just double check in here you can see in there that's the
fan blades you can just double check and make sure that this is not clogged
because sometimes debris does get into here as well and this will also cause your dyson to to
have faults and problems if your brush bar is not spinning make sure these contacts here are clean
because they make contact with these two contacts here which then put
power down there to the brush bar and that's one reason your brush bar doesn't spin
so yeah if that's clean the back of it is pretty clean you can then just
reinstall this by snapping it back in there like that and there you go
and that's how you clean your clean all the filters in your dyson thanks for watching if you
still watching now please give me a thumbs up let me know this video helped you out and check out my