russian eva 49 will be conducted by oleg navinsky as ev1 in the red stripe suit and pyotr dubrov as
ev2 in the blue stripe suit tv2 will egress the mini research module 2 or mrm2 first and ev1
will hand out the power cable clamps and bridge rail handrail bundle then ev1 will egress mrm2
then ev1 will translate to the strela operator post and ev2 will translate to
the strela end effector and stow the hardware bundle and release the strela end effector
ev1 will extend the boom of strela with ev2 onstrella to the service
module ev2 will tether strela and defector to the service module just above the multipurpose
laboratory module or mlm ev1 will translate to the connector patch panel number 2 on mrn2
pyotr will install cable clamps from the bundle that the two brought out
oleg will then route the mlm us os power cable bundle tube
to the mlm installing the cable into the cable clamps pyoder installed
oleg will then translate back to mrm2 connector patch panel number one
and release it from mrm2 pyoter will make the four connectors of
mlm's usos power cable bundle 2 to the mlm patch panel number 16.
oleg will route mlm usos power cable bundle number one
to the mlm installing the cable into the cable clamps pyoder had installed
then oleg will translate back up to the strela operator post pyotr will mate
the four connectors of the mlm usos power cable bundle number one the mlm patch panel number 15.
pyotr will translate back to the strela in defector and release the tether
oleg will then maneuver strela with pyotr attached to it and extend it to the pma and fgb interface
pyotr will install the strela cradle on the fgb
oleg then translates down strella's boom to meet up with pyotr
the two will demate the service module power cable
and incorporate it with the new mlm power cable bundle number two into the us power system
then the mlm ethernet cable will be mated while the teams
on the ground power up mlm cable bundle number two and the power down
of the next power cable the two will then demate the service module power cable and incorporate
it with the new mlm power cable bundle number one into the us power system
once all the connections have been made oleg will translate back to the strela operator post
pyotr will release the shrela boom from the cradle oleg will then maneuver the strela boom
and peoter to the sm and pyotr will tether the strela end effector to the sm handrail
piotr will then release the bridge rail handrail bundles from strela
and attach the bridge handrails to the mlm
oleg will release the mlm us os ethernet cable and real from mrm2
and route the cable to the mlm patch panel number 17.
you will leave the reel on the strela end effector
oleg will then mate the mlm usos ethernet cable
the leg will then translate back to the strela operator post and pyoder will translate to the
strela end effector and will release the strela end effector from the service module handrail
oleg will then maneuver the strela boom to the mrm2
where pyotr will attach the tether to the end effector and mrm2 handrail
then oleg will translate to the magnetic attachment location on mrm2 and pyotr will
remove the hardware from the end effector and stow it into mrm2 and retrieve the biorisk experiment
piotr will translate to the magnetic attachment location and attach the biorisk experiment
the crew will then translate back to the mrm2 eba hatch
eb1 will egress first followed by ev2 and close the eva hatch this will conclude russian ev849 you