Hi, I'm Mike from 1A Auto.
We've been selling auto parts for over 30 years.
What's up, guys?
I'm Andy from 1A Auto.
Here, I'm going to be removing and re-installing a wiper arm on this 2008 Chevy Silverado work
truck.
If you need parts for your vehicle, click the link in the description and head over
to 1aauto.com.
All right, we're going to start by opening the hood, right next to the kick panel.
Pull on that lever.
Then underneath the hood, there's a catch right here.
Move it to the right, right there.
Lift up on the hood.
All right, now there's a little cover over the wiper arm, just kinda take a straight
blade screwdriver.
You could also take a 90 degree pick.
Get underneath here.
There's a little latch, and then slide that up, and then you can access the nut.
Now I'm going to use a 15 millimeter socket and extension and a ratchet.
You'll loosen up this nut and take it off.
Once it's loose, you can grab it with your hand and pull that off.
Now I'm going to grab the wiper arm.
Just rock it up and down to release it down below on the shaft and slide it up, just like
that.
Then twist it.
Now there is the washer nozzle hose.
We're going to disconnect that down here.
Slide that off, just like that, and pull the arm off, and now I'm going to do the same
and take the other side off.
Alright, we're going to take the wiper arm.
Just line this up, position.
It's actually a little bit easier to take and install the washer hose now.
Just get that lined up and then push it on, just like that.
Now that the arm's on, we'll just push it down.
Now on the windshield there is a little mark, generally, a little tab where the wiper should
go.
You can line that up with that.
If it doesn't, you could mark it before you take it off or just position the blade where
you would want the blades to be.
I'm going to take the wiper nut.
Install the nut, and push down on the arm when you're installing the nut.
A 15 millimeter socket, extension, and a ratchet.
I'll just tighten this down.
Now I'm going to take a torque wrench and the 15 millimeter socket and I'm going to
torque this nut down to 22 foot pounds.
I can take the cover and lock the cover back down and I'll do the same with the other one.
Speaker 3: Thanks for watching.
Visit us at 1aauto.com for quality auto parts, fast and free shipping, and the best customer
service in the industry.