This video shows the process of setting up, fitting and removing the CaStar R hood. Always refer to the Instructions for Use provided with each product. This video is not intended to replace the Instructions for Use.
CaStar R Hood For NIV Fitting and removing
A patient interface for non-invasive ventilation that is comfortable, versatile and lightweight. Available in six sizes to comprehensively cover the broadest range of patients from paediatrics to adults.
Size information is on the top and side of each box.
Some configurations include a tape measure on the outside so that the correct size can be selected without opening the box.
Inside the box you will find...
CaStar R Hood
Under arm straps
Inflation bulb* *with some configurations
Instructions for use
Ear plugs*
Some configurations include ear plugs should you wish to use them.
Fitting the hood.
Open the bag using the perforated edge.
Reshape the helmet.
Remove the patient access port cap.
Check the smooth operation of the anti-asphyxiation valve and place to one side.
Attach the arm straps to the rear of the helmet to suit the patient.
Attach 22mm breathing system inspiratory and expiratory limbs.
Start the ventilator.
Two people firmly open the collar using their finger tips, and thumbs along the rigid ring so that the patient's head can pass through.
Raise the patients arms to ensure that the straps are tucked well under for strap sizing.
Fit the access port cap then pull the anti-asphyxiation button until the hood inflates.
If needed adjust the straps so that the rigid ring rests about 1cm away from the shoulders.
When positioned correctly, you may fold and pin the front strap ends to enhance patient visibility.
Inflate the cushion. The cushion should be full but not under pressure.
When suitably filled clamp off the cushion. You may remove the pump.
The hood is now set up correctly.
You can use the access port for temporary patient access if needed.
Removing the hood
Deflate the cushion by opening the clamp.
Remove the access port cap.
Undo the front straps.
Two people firmly open out the collar and remove the hood.
Stop the ventilator
CaStar R Hood for NIV Fitting and removing
Intersurgical Quality, innovation and choice.