This is the Stickney Water Reclamation Plant in Chicago, the largest wastewater treatment plant in
the world. It serves more than two million people in the heart of the Windy City, converting all
their showers, flushes, and dirty dishwater, plus the waste from countless commercial and
industrial processes into water safe enough to discharge into the adjacent canal which flows
eventually into the Mississippi River. It all adds up to around 700 million gallons or two-and-a-half
billion liters of sewage each day, and the plant can handle nearly double that volume on peak days.
That’s a lot of olympic sized swimming pools, and in fact, the aeration tanks used to biologically
treat all that sewage almost look like something you might do a lap or two in (even though there
are quite a few reasons you shouldn’t). However, flanking those big rectangular basins are rows
of circular ponds and smaller rectangular basins that have a simple but crucial responsibility in
the process of treating wastewater. We often use chemicals, filters, and even gigantic colonies
of bacteria to clean sewage on such a massive scale, but the first line of defense in the fight
against dirty water is usually just gravity. I’m Grady, and this is Practical Engineering.
In today’s episode, we’re talking about settlement for water and wastewater treatment.
This video is sponsored by Wealthfront. More on them later.
This video is part of a series on municipal wastewater handling and treatment.
Rather than put out a single video overview of treatment plants (which
many other channels have already masterfully done), we’re taking a
deep dive into a few of the most interesting parts of converting sewage into clean water.
Check out the wastewater playlist linked in the card above if you want to learn more.
The job of cleaning water contaminated by grit, grime, and other pollutants
is really a job of separation. Water gets along with nearly every substance on earth. That’s why
it’s so useful for cleaning and a major part of why it does such a good job carrying our wastes
away from homes and businesses in sewers. But once it reaches a wastewater treatment plant,
we need to find a way to separate the water from its inhabitant wastes so it can be reused or
discharged back into the environment. Some contaminants chemically dissolve into the
water and are difficult to remove at municipal scales. Others are merely suspended in the swift
and turbulent flow and will readily settle out if given a moment of tranquility. That’s
the trick that wastewater treatment engineers use as the first step in cleaning wastewater.
Once it passes through a screen to filter out sticks and rags,
sewage entering a wastewater treatment plant’s first step, or primary treatment,
is the simple process of slowing the wastewater down to allow time for suspended solids to settle
out. How do you create such placid conditions from a constant stream of wastewater? You can’t
tell people to stop flushing or showering to slow down the flow. Velocity and volumetric flow are
related by a single parameter: the cross-sectional area. If you increase this area without changing
the flow, the velocity goes down as a result. Basins used for sedimentation are essentially
just enormous expansion fittings on the end of the pipe, dramatically increasing the area of flow
so the velocity falls to nearly zero. But just because the sewage stream is now still and serene
doesn’t mean impurities and contaminants instantly fall to the bottom. You’ve got to give them time.
How much time is a pretty important question if you’re an engineer because it affects the overall
size of the basin, and thus it affects the cost. Particles falling out of suspension
quickly reach a terminal velocity, just like a skydiver falling from a plane. That maximum speed
is largely a function of each particle’s size, and I have a demonstration here in my garage to show
you how that works. I think it’s intuitive that larger particles fall through a liquid faster than
smaller ones. Compare me dropping a pebble to a handful of sand. The pebble reaches the bottom in
an instant, while the smaller particles of sand settle out more slowly. Wastewater contains a
distribution of particles from very small to quite large, and ideally we want to get rid of them all.
As an example, I have two colors of sand here. I sifted the white sand through a fine mesh,
discarding the smaller particles and keeping the large ones. I sifted the black sand through the
same mesh, this time keeping the fine particles and discarding the ones retained by the sieve.
After that, I combined both sands to create a gray mixture, and we’ll see what happens when we put it
into a column of water. This length of pipe is full of clean water, and I’m turning it over so
the mixture is at the top. Watch what happens as the sand settles to the bottom of the pipe.
You can see that, on the whole, the white sand reaches the bottom faster, while the
black sand takes longer to settle. The two fractions that were previously blended together
separate themselves again just from falling through a column of water.
Of course, physicists have used sophisticated fluid dynamics with partial differential
equations to work out the ideal settling velocity of any size of spherical particle
in a perfectly still column of water based on streamlines, viscosity, gravity, and drag forces.
But, we civil engineers usually just drop them in the water and time how quickly they fall.
After all, there’s hardly anything ideal about a wastewater treatment plant. As water moves through
a sedimentation basin and individual particles fall downward out of suspension, they take paths
like the ones shown here. Based on this diagram, you would assume that depth of the basin would be
a key factor in whether or not a particle reaches the bottom or passes through to the other side.
Let me show you why settling basins defy your intuitions with just a tiny bit of algebra.
You’ve got a particle coming in on the left side of the basin. It has a vertical velocity - that’s
how fast it settles - and a horizontal velocity - that’s how fast the water’s moving through the
basin. If the time it takes to fall the distance D to the bottom is shorter than the time it takes
to travel the length L of the basin, the particle will be removed from the flow. Otherwise it will
stay in suspension past the settling basin. That’s what we don’t want. As I mentioned,
the speed of the water is the flow rate divided by the cross sectional flow area - that’s the
basin’s width times its depth. Since both the time it takes for a particle to travel the length
of the basin and the time it takes to settle to its bottom are a function of the basin’s depth,
that term cancels out, and you’re left with only the basin's length times width (in other words,
its surface area). That’s how we measure the efficiency of a sedimentation basin.
Divide the flow rate coming in by the surface area, and you get a speed that
we call the overflow or surface loading rate. All the particles that settle faster
than the overflow rate will be retained by the sedimentation basin, regardless of its depth.
Settlement is a cheap and efficient way to remove a large percentage of
contaminants from wastewater, but it can’t remove them all.
There are a lot more steps that follow in a typical wastewater treatment plant,
but in addition to being the first step of the process, settlement is also usually the last one
as well. Those circular ponds at the Stickney plant in Chicago are clarifiers used to settle
and collect the colonies of bacteria used in the secondary treatment process. Clarifiers
are just settlement basins with mechanisms to automatically collect the solids as they fall
to the bottom. The water from the secondary treatment process, called mixed liquor,
flows up through the center of the clarifier and slowly makes its way to the outer perimeter,
dropping particles that form a layer of sludge at the bottom. The clarified water passes over a weir
so that only a thin layer farthest from the sludge can exit the basin. A scraper pushes the sludge
down the sloped bottom of the clarifier into a hopper where it can be collected for disposal.
Settlement isn’t only used for wastewater treatment. Many cities use rivers and lakes as
sources of fresh drinking water, and these surface sources are more vulnerable to contamination
than groundwater. So, they go through a water purification plant before being distributed to
customers. Raw surface water contains suspended particles of various materials that give water
a murky appearance (called turbidity) and can harbor dangerous microorganisms. The first step
in most drinking water treatment plants is to remove these suspended particles from the water.
But unlike the larger solids in wastewater, suspended particles creating turbidity in
surface water don’t readily settle out. Because of this, most treatment plants use
chemistry to speed up the process, and I have a little demo of that set up here in the studio.
I have two bottles full of water that I’ve vigorously mixed with dirt from my backyard.
One will serve as the control, and the other as a demonstration. The reason these tiny soil
particles remain suspended without settling is that they carry an electrical charge. Therefore,
each particle repels its neighbors, fighting the force of gravity, and preventing them from
getting too close to one another. Chemical coagulants neutralize the electric charges
so fine particles no longer repel one another. Additional chemicals called flocculants
bond the particles together into clumps called flocs. As the flocs of suspended particles grow,
they eventually become heavy enough to settle out, leaving clarified water at the top of the bottle.
Treatment plants usually do this in two steps, but the pool cleaner I’m using in the demo does both
at once. It’s a pretty dramatic difference if you ask me. In a clarifier, this sludge at the bottom
would be pumped to a digester or some other solids handling process, and the clear water would move
on to filtration and disinfection before being pumped into the distribution system of the city.
Our ability to clean both drinking water and wastewater at the scale of an entire
city is one of the most important developments in public health. Sedimentation is used not
only in water treatment plants but also ahead of pumping stations to protect the pumps and pipes
against damage, with canals to keep them from silting, in fish hatcheries, mining, farming,
and a whole host of other processes that create or rely on dirty water. The science of sedimentation
and settlement is something that impacts our lives in a significant way and hopefully
learning a little bit about it helps you recognize the brilliant engineering keeping our water safe.
Just like we keep the environment clean by investing in treatment infrastructure,
you can start investing for your financial goals with today’s sponsor, Wealthfront. Wealthfront is
an automated investment platform that uses software to help you build a portfolio and
grow your money over the long term. Many people, myself included, are intimidated
by the world of investing. It seems complicated, like there’s so much to learn and keep track of,
especially when the stakes are your own savings. But, time is your biggest asset when investing.
As Albert Einstein said, “compound interest is the eighth wonder of the world.” So,
if you have financial goals for the future like buying a house or retirement, it makes sense to
start now. Wealthfront simplifies investing and walks you through the process of building and
managing a portfolio based on your risk tolerance. All you need is a few minutes and $500 to open
an account, and they care of the rest. It’s like hiring a financial manager except with
a beautiful interface, no phone calls, and an affordable quarter-percent annual advisory fee.
And Wealthfront is offering to waive that fee for fans of Practical Engineering,
meaning they’ll provide their services entirely free up to $5,000 in assets for life. Give it a
try today at the link in the description. Support our sponsors helps support the channel. Again,
that link is in the description. Thank you for watching, and let me know what you think!