In this video, I wanna focus in on a specific type of condensation reaction called an aldol
condensation.
From prior videos, we know that an enolate is a negatively charged species and it can
attack electrophiles.
But what we didn’t really realize up until this point is that these enolates can actually
react with themselves.
They can react with themselves to condensate specifically if it’s a ketone or aldehyde,
it’s going to condensate into this category of molecule called a beta-hydroxycarbonyl.
The final products are called aldols, that's the
reason that we have that name because they’re part aldehyde and they’re part alcohol.
Hence the name aldol.
What I’m going to do here is I’m going to show you the full mechanism for an aldol
condensation.
One of the most important things to realize about any condensation reaction is that a
big part of getting these questions right isn’t just knowing the mechanism.
It’s knowing how to line up your carbonyls because if you line them up incorrectly, you’re
going to be doing a lot more work and you’re probably going to get it wrong.
I’m going to teach you not only just the mechanism but I’m going to use my years
of teaching experience to try to ingrain this method into you of how's the best way to line
up your carbonyls so that you can always visualize the product the easiest.
The first step is super easy.
All it is is that using some kind of base, usually OH negative, to pull off a proton
and make your enolate.
Remember that enolates have two different resonance structures.
There's also a resonance structure with the negative on the O, but we're not going to
use that one.
For this mechanism, you always wanna be using the enolate on the carbon because that's going
to help predict what our product looks like.
The reason that we would get an aldol condensation is when you have a base, but you have no other
electrophile.
You might be wondering, “How would I know that something is an aldol?’
And how would I know that something is, let’s say a reaction from another chapter because
there’s a lot of reagents that you know now.
But if you are forming an enolate without an electrophile to react with, then you know
this is going to be a self-condensation which is exactly what we're going to draw.
So, we've got our enolate.
Notice that my enolate, I’m drawing it on the left hand side.
I’m always going to draw the enolate on the left.
I don't have an electrophile on the right.
I don’t have a halide or an acyl chloride or whatever.
That means I’m forced to react with just another carbonyl.
How does that work?
I like to call them there’s the enolate, and there’s the electrophile.
Why?
The enolate is the one with the negative charge.
The electrophile is the one that you’re going to attack the partial positive of.
This one should not be in an enolate form.
You should just draw this the normal way that it was before the these reacted.
A few other pointers here, you want to make sure that your enolate is drawn on the left
but that your anion is toward the electrophile because you want to have the electrophile
and the anion as close to each other.
Here, I’m drawing the enolate on the left but I wanna make sure my negative charge is
as close to the electrophile as possible.
Also, any R groups on it: face downwards.
This is going to come up more later.
But if I had bulky R groups on that CH2, I should actually face them facing down to clear
the way for the electrophile that I’m about to attack.
My electrophile, we’ve actually got some special rules about that one.
The electrophile, you draw on the right, always on the right.
You should draw your smallest group toward anion.
The reason is because we're going to have to attack with the anion and it’s going
to be easiest to visualize if I have my small group close to the anion and my large group
away from it.
I think that’s enough to get going.
This mechanism is going to look like as follows.
This a nucleophilic addition mechanism.
My negative charge is going to attack my partial positive.
I’m going to break a bond.
I'm going to make a tetrahedral intermediate.
It’s a big tetrahedral intermediate, I understand.
But you still have an O negative with now what groups?
Now you’ve got the extra CH2 that’s attached here.
We still have that H. the H that was here, it’s still here.
It's just I'm not drawing it, and then there's the CH3.
This is called a nucleophilic addition mechanism because we're going to protonate the O at
the end.
We're not going to kick out a leaving group.
We use water or acid to protonate and to give us our beta-hydroxycarbonyl because I have
a beta-hydroxy on my carbonyl.
The reason I call it carbonyl is because it could be either a ketone or an aldehyde.
It’s just depending on what you started with.
That’s really it.
It's a really easy mechanism.
It’s nucleophilic addition, putting two molecules together.
One thing that I always encourage my students to do is to count up your carbons at the end
because the carbons in your product should match the carbons of your original enolate
times two.
My original enolate had how many carbons?
Two.
So, I have two carbons here.
I’m going to put two C. I'm adding another two C. That means that my beta-hydroxycarbonyl
should have, if I did it right, it should have four C. Does it?
Let's count.
Yeah, we did it right.
You'd be surprised how many stupid mistakes are made because you miss a carbon or you
add an extra carbon.
Guess what?
Professors are not forgiving on that kind of stuff.
You can make a lot of mistakes but you can miss carbons because that's just a completely
different molecule.
It turns out that beta-hydroxycarbonyls are a little bit more complex.
It doesn’t just end there because beta-hydroxycarbonyls are much easier to dehydrate than a typical
alcohol.
Remember, this concept comes from Organic Chemistry 1 alcohols underwent dehydration
reactions.
Remember that in a dehydration, I’d take away a water and I get a double bond.
Usually, you need heat to do that or you need a lot of very good strong acid.
Usually it would be an acid-catalyzed dehydration.
I know what I’m talking about so I’m going to write it here.
Usually this would be an acid-catalyzed dehydration in order to do this.
But it turns out that this alcohol, this specific beta-hydroxy is not going to require a strong
acid to dehydrate.
In fact, it's not even going to require heat.
Why?
Because look at the product.
After you dehydrate, the dehydration product is uniquely stable.
Why?
Because it’s conjugated.
Due to conjugation, this double bond is much more stable than a normal double bond.
What that means is that it's not going to take much for that alcohol to leave.
In fact, it can leave both in acidic environments and in a basic environment.
In an acidic environment, it’s going to leave via an E1 mechanism.
If you guys remember, that’s a carbocation mechanism where you wind up forming a carbocation
and doing a beta elimination.
In a basic environment, you can’t get a carbocation.
You would actually react by another mechanism that we’re not even going into in this course
called E1CB or E1 Conjugate Base.
The point here isn't for you to draw all these mechanisms.
That's not my goal right now.
What I want you to know is that many times because this dehydration is so favored, we're
going to assume that the condensation product dehydrated on its own without even requiring
an explanation.
Sometimes you’re going to see your professor just write the product as a double bond, as
a dehydration product and you're not going to ask questions.
You’re not going to say, “Professor, why did it dehydrate?”
These are going to spontaneously dehydrate because the product is so stable.
We do need to know what this product is called.
It is in general a dehydration product but specifically it has two names.
One, and most commonly it’s called an alpha,beta-unsaturated that's because now we have an unsaturated
bond between our alpha and beta carbons.
Alpha,beta-unsaturated, keep that in mind.
Another really important name for it is an enone.
An enone just makes sense.
It’s a combination of alkene and one.
That would either come from the ketone or the aldehyde.
It’s still a carbonyl.
That’s where we get the word enone from.
Both of them are interchangeable.
They just mean that it’s the dehydration product of an aldol condensation.
Many times, for example when I'm drawing my products for all of my practice problems,
I’m always just going to be taking it to the enone.
I'm going to be assuming dehydration and for your sake, if you're watching these videos
and you're wondering, “What should I do?
Should I dehydrate?”
I would always dehydrate unless your professor says not to because like I said, it's so favored
that it's just going to happen without a lot of stimulus.
Awesome, guys.
That's it for this video.
Let's move on to the next one.