in this video will skip all the introductory stuff and get ready to
connecting the Adam 61-60 relay module to the productivity 3,000
using Ethernet IP protocol if you need more details
on using it and I P on the productivity 3,000 check out these videos
they provide a lot more background an introductory information
we want to control the six relay outputs by simply putting bits and a 16-bit tag
on the productivity 3,000
and then what the evening I P I O messaging copy that down to the Adam
61-60 in the background
so we don't have to worry about it setting it up is just like setting up
any other eating IP scanner on a productivity 3,000
he just double click on Harbor configuration and wreckage in her client
over into this window you notice that the digital and analogue models didn't
previous videos
are already set up here and now we're gonna have this relay module
went ahead and filled in all the usual tags: anything IP address
and then down here always liked it I O messaging we need to create an input
data rate
the input array here just a dummy placeholder cuz the relay module a
strictly in output only device
go ahead with the one word expect to see right here or any output tab
that's the important one we're gonna send that data four times a second
the connection point on the oven tech devices 101
then when you create an output array with one 16-bit unsigned word
and just a single car racing element in that array
and of course we're gonna send that one element
down to three lei device don't forget that on the about tech devices we need
to include a status header
and configuration data same thing as before
let's create an array
couldn't specify as a 60 min Thein Sein
one element mr Katter said any data down
with the configuration header give-and-take doesn't need it was click
OK
or text look good again I like to extend all my strengths they can handle any
message that might come down the pike
and there's a 61-60 relay output module
let's go back in there click on that monitor button so we can create
a data view that contains all these new tags we just created
great we are said ready to go let's transfer that down to the
controller
and I was being the data views we see what's going on let's go find that new
data view we created
there to 61-60 here's our techs in the last example is doing some graphing on
me get rid of that
year ago SLA see this is our Relay output module
let's go in the neighborhood click on that write this
we were successful connection we are connected we did for the crackdown outta
the device
perfect all we're gonna do now
is modify this output word to control the relays on the module
for we do that let's go ahead convert this view over to binary
I make it will be easier to see
I currently have a light connected to the second bit which is the third digit
here
in the six-team that word such a turn on that relay
we just that bit and sure enough the light turns on
clear that that
in the light turns off well that's all there is a setting up and using the
Monte Kadam 61-60 relay module
with the productivity 3,000 and Ethernet IP check out the other videos in the
series for more tips on using
get an IP with the productivity 3,000 and don't forget
automation direct tech support is always free and you always talk to a live
person here in the US within minutes
please keep in mind that will support will be happy to help you with any
productivity 3,000 even the IP questions you may have
if you have any questions about the Avante tech devices you need to contact
Yvonne tech support
automation direct cell or support about tech devices
performance post value thats productivity
from automation direct