Hello friends
I first configure 2 WAN connections
In this short video
I show you the easiest way to configure load balancing on Mikrotik router
Configure PPPoE client for the first WAN connection
Pay attention to uncheck the Add Default Route item
Configure PPPoE client for second WAN connection
Pay attention to uncheck the Add Default Route item
Next configure NAT for 2 WAN connections
Configure NAT for the first WAN connection
Configure NAT for the second WAN connection
The next step is to configure the load balance for 2 WAN connections
In the Gateway, you add both WAN connections
Note that the distance value is 1
So you have configured the load balancer for 2 pppoe connections on the Mikrotik router
It's very simple, isn't it?
However you need to configure more so that the services run without errors as follows
Configure packets going into WAN1 and then going out to WAN1
Configure packets going into WAN2 and then going out to WAN2
So we have finished the installation steps
If this helps
Don't forget to leave a like and more
Subscribe to my YouTube channel for more helpful videos
Help me 500K subscribers