no matter what launcher you have we're gonna fix it without opening it up today let's do it
we'll start with this launcher this is actually a fake launcher that i have and we're gonna just
quickly take it apart like this okay so these are the basic components of the launcher as you
can see i have taken it apart it's quite easy to do this is basically to show you the mechanism of
why it actually skips so right here you can see that these are actually the clicks. These bumps
are what make it click inside and whenever you click your launcher you actually wear these down
the bad thing is that they wear down and once they do this will be free spinning just like
what you saw...and this is that launcher
what i did try to do is of course open it up and
nothing was wrong with it the gears inside are actually very big they're a different kind of gear
and they have a lot more engagement than this
and there is the problem actually
of how to fix it because a lot of people think that it's inside of the mechanism and that's these guys right here
okay so all these parts just come off
so you see this is what gets worn down
to fix a hasbro lay blade is a little bit harder because of what they're made up of
so this is what i have and what i actually use
as a holder like this. so this is where this came from. The hard part will be to actually
well if we catch a bit of it we'll see if we can fix the hasbros too
so it's right here we have one
and you can tell that it's very loose
and that's precisely the reason why we don't click on the launchers
now it's very simple to do the very first thing you should actually check for is if the middle is free spinning
you could use any kind of glue really i did notice that if you use crazy glue that it's so watery that it might run into the mechanism so that's why i'm using
the hot glue gun method and you gotta really get it into the crevices while lining up the
little clicker and that's of course what we talked about in the beginning of the video and make sure
you shake it around and i mean pull the rip cord so that it doesn't dry in any of the mechanisms
and it's still able to be free spinning so that you could actually still launch your beyblade
and you could do this with the takara tomy string launchers as well if for some reason you have
those already clicked out this is the left right launcher that came with legend spriggan and even
this one was not working well for me and you could see at the end of the video i will test every one
of these launchers to see and show you that they actually work after this and it's very simple
so once that is done you're pretty much done two simple steps align it and of course
use the glue to secure it to the clicker which is what actually wears down and
prevents the launcher from working properly over the long run you can do this with any
hasbro launcher string launcher slingshot and of course the rise beyblade launchers which are
very popular nowadays and i think are going to make a big comeback so basically look out
for that opening on the rise beyblade is a lot easier so you can see that big opening right there
TEST TIME
i hope that this does help you. You could do it with all of these because as you saw
they are all working now
awesome!!
until next time guys have some fun and let it rip