'Uh... can you get out?'
You might be late'
latte cookie?
'Hah~ You've found it well''I'll
start class~'
Now, let's start class.
In this class, there are next-generation production methods that change
the meta of the existing 3d pen production method, so
please listen carefully.
First, stack 5 layers of filament convexly on your face.
And I'll put it in a pocket oven and smooth the surface.
Since latte-flavored cookies are feminine cookies, we
will make the face rounder
and give a softer impression.
It's grilled well.
The face is finished if only the uneven exterior is trimmed with the burning pen skill
. Now, let’s make the
body ~
Stack up five layers of filaments along the body line.
After all, latte-flavored cookies are
really good because
their arms and legs are elongated .
Likewise, put it in a pocket oven and press it moderately with an iron.
The body is made so easily.
Use a nipper to remove the pressed armdrament
and trim off the uneven side with a burning pen.
And new equipment to lead the new 3D pen meta!
I will use [Gyupa Cutter].
Gyupa Cutter is a 3D pen-only equipment
that cuts filament with a hot hot wire. It is very sophisticated and easy to cut
3D pen work.
Even narrow gaps that are difficult
to trim can be trimmed very easily with a Kyupa cutter. In the
past, it was easy to stack or deform the filament,
but removing the filament was very difficult.
I had to cut and grind it hard with a
saw, wood burning tool, or sandpaper .
However, if you have a Gyupa cutter, you can cut it too easily.
Thanks to that, there are many new productions
, so it can be said that the first generation before the Gyupa cutter came
out, and the second generation 3D pen production method after it came out .
This Gyupa Cutter is made only with materials obtained
by disassembling the items in the house .
If you are curious about how to make it, please request it in the comments.
If you request more than 100 minutes, we will share the recipe.
Let's make a shoulder cloak.
First, imagine the unfolded shoulder cape and make a
U-shaped cotton.
And you can go up like this and lower the part down.
For the skirt, attach Mr. Slime to the body,
mark a dot with filament in the middle, and connect it
to create a skeleton.
Peel it off and spread it out
to create a skirt pattern that fits your body perfectly.
Latte-flavored cookies boasting pretty looks and powerful performance are
said to be mixed-breed cookies born between the Coffee and Milk clan.
There is a trick that seems a little lacking, but
it's even more attractive.
The latte magic used by the latte
cookie looks similar to the coffee magic of the espresso cookie, but the
milk magic circle is added to the basic coffee magic
to have more various effects and powerful damage.
It is a very powerful character that
can change the arena meta
because it is silent and stiff . Use the
oven break skill to smooth and soften
the shoulder cloak piece you made earlier, then place
it on the body to shape it.
This is the most exciting
feeling. Is it like buying new clothes and trying on them?
I bought it in a place I liked and tried it on,
but it feels good if it fits well~
Oh, it feels good.
I'll make a cloak car as well.
Make the noodles opposite to the shoulders, and
then grill them with an iron and shape them to make the
collar simple and neat.
The cream brooch on the neck is made with
a single pen touch, as
if squeezing the cream from a milking bag .
Try making it several times
until you get a pretty shape .
I made it like this in three times.
Let's put an interesting feature.
Let's make the latte flavor cookies so that the waist is folded.
For easy operation, heat up with a lighter, raise your arms, and make a
hole in the center of your waist.
It must be carefully drilled so that it can come out to the center of the other side.
leading 3D pens with the
second generation of Cartography go gyupa cutter will cut in the marked line.
Previously, I had only imagined making it like this, but
now it is possible.
Now, if you put a pin in the hole, you
can fold the waist like this.
The method of making such a folding joint is
called [Fila-joint].
I'll cover the pillar joints again next time.
Let's finish the skirt side.
Tighten the skirt and make a skirt that spreads out to the
side.
I will lower the arm that was put up earlier
and apply a fila-joint to the arm as well.
If the method applied to the waist was fila-joint A type,
this method is A type single.
It is used when it is difficult to dig a groove
because the A-type single application area is narrow
, and it is characterized by having one pin fixed.
Now put a pin between the joints.
For A-type singles, attach a pin to fix one side with an adhesive,
and melt the end of the lighter on the other side to make a
fixing part (it only fixes it so that it does not fall out of the hole).
Note that
if both sides of the pin stick to your arm, you can't move it.
I'll combine all the parts I made.
Attach the shoulder cape, the cape collar, and the head in order, and attach a
cream brooch at the end.
Let's make soft creamy hair~ You can make
hair more easily by dividing the layers into
back hair, middle hair, and bangs .
After attaching the back of the hair first
, make a pongee with Mr. Slime,
then lay the first side with the skill
of making a bone on top
of it and filling the side between the
bones, and the second side with a
plastering pen skill that creates a smooth finished side.
give. And if you finish the surface
with fire property equipment and sandpaper, the
back hair like a baby shark is completed.
Now summon the puff slime and
lay a latte-flavored cookie on top of
it to set the middle and bangs.
Latte-flavored cookies appeared from the update of'Fire of the Union',
which added guild content to Cookie Run Kingdom
. The story of the appearance of
puff cookies and almond cookies was also very interesting.
Cookie Run Kingdom's characters seem to be more fun and affectionate
because they come out according to the story .
Devnus for making fun games..
Thank you. cheer up!
You just need to put the finished hair on your head.
Before that, you'll have to make a cap and a spoon.
Place a cup on the paper, draw a circle on the circle, and
draw another small circle in the middle , and then apply
tape to coat it.
The hat is slightly oversized than the original size.
If you make it this way, I think you can use the
hat as a cup cover .
For the top cone of the hat , I will
apply the formula to make a
pattern. You can make a cone really easy
just by finding the center angle of the flat pattern .
This is done by the radius times the height of the conical face times 360 degrees.
I thought I would never use the math formula I learned as a student,
but the day has come to be used. Put it in the
pocket oven and take
it out and turn it around to match the ends.
The length must have increased a little when pressed by the iron.
You can cut that part with a gyupa cutter and
attach it to the top of the hat brim .
Lastly, I made a spoon, but the in-
game size is too small and thin, so
I will put this iron core to make it bigger and more beautiful.
Draw the shape according to the shape, and
trim the elaborate gaps beautifully with a Gyupa cutter.
Now, it's really big and beautiful~
It's incomparable to a toothpick like this. If you
put a magnet on your hand and make it possible to hold a spoon, you're
done with a latte-flavored cookie, an
attractive magical dealer
that changed the meta of Cookie Run Kingdom and 3D Pen!
Let's enjoy the latte-flavored cookies
with the wonderful performance of the mint choco cookie .
Let's go with confidence!
How to draw a pretty latte magic circle?
I'm drawing confidently at once~
Look at what the teacher does~
Wow~ It's so cool in the world,
it's just my taste~
I thought I'd do it.
How do you think this teacher looks a little awesome now?
Hmm~ That's amazing.
Would you like to learn latte magic?
What do you think of coffee magic?
You can't learn just by stealing.
Hahaha! How about tea time together as a means of congratulations on the
light ?
I think it would be nice to go for a cup of latte right now.
shall we go together?
Latte~ You have to
drink it when it's warm.
There was no such a kingdom back then.
Cookie Run Kingdom♥
Then, look forward to the next video.
Thank you!