- Hey, what's up guys.
Welcome back to an episode of Chemical Guys Detail Garage.
Today, we have something beautiful.
We have a 2021 BMW M-4 in the shop.
We're going to be treated to a full on detail,
starting from the wheels, then to the paint, then to the
interior. But anyways guys,
step number one is going to be the wheels,
step number two is going to be the paint,
and step number three is going to be the interior.
So I'll meet you guys at the wheels.
going toRock music)
So step number one on this detail is going to be clean up
the face of the wheel and the barrel and the lug nuts,
basically the whole entire wheel.
So as you guys can see,
there's a lot of breakups giving it this brownish effect
that if you do not remove over time,
since there's so much heat going on here,
whenever you're driving down the highway, down the road,
it could embed itself on the face of the wheel and then can
permanently damage it.
So this is why we always recommend clean your wheels
constantly.
So you could avoid any damage on the face wheel or the
barrel. So as you guys can see down here,
I also have an assortment of products that I'll be using.
I have my Red Rocket,
that's going to help me get into the barrel of the wheel.
I have my Dirt Trap,
which is going to be filtering my water while I wash.
So like that I can separate all my brake dust and filth
at the bottom and always have clean water at the top.
And then I have my All in the Details Exterior Brush.
It did it as a three brush step, but in this occasion,
I only need the big one.
And finally, just to clean up the face of the wheel,
I'll be using the Wheelie Brush.
So step number one is going to be rinsing off
the face of the wheel,
just so I can knock off all the loose grime and debris and
brake dust.
So I'm just going to grab my finger.
Just so I can show you guys the finish of it actually.
So right here,
you guys can see that's actually the finish or the wheel
compared to the brownish effect.
So we're lightly going to rinse it off.
So after I finished rinsing down the face of the wheel,
you guys can still see down below up top.
There's still break, dusting on the face of it,
so that's why we're going to be using Signature Series Wheel
Cleaner to remove it efficiently
without harming the finish of the wheel.
So Signature Series Wheel Cleaner
is actually a citrus based product that is very tough on
grime, but very sensitive on finishes over the wheel.
So we're going to start out by spraying it all over.
By spraying it all over, I'm going to allow,
Signature Series Wheel Cleaner to get all the break dust out
and help me uplift it without
me having to scrub so much.
Awesome. I'll be adding two ounces into my wash bucket
like that. I like to have extra lubrication
whenever I'm washing with my brushes.
So now we're going to start off by activating the suds
that are inside my bucket, which is the wheel cleaner.
And you guys can see Signature Series Wheel Cleaner
foams up very amazing.
So we're going to start off by cleaning up
the barrel of the wheel.
By cleaning up the barrel of the wheel,
we're going to start off with the Red Rocket.
The Red Rocket has nylon bristles that are super soft
and it has a rubber tip up top
that's not going to harm the finish of the wheel.
So we're going to get a little bit more suds.
Now I want to start off with top to bottom.
We can go deep in the back.
We're going to start scrubbing it back and forth.
And you guys just can see how Signature Series Wheel Cleaner
foams up amazing.
All that foam. It's just extra lubrication.
So I ensure myself I did not damage the wheel.
The brush went in like this and it came out like this.
So how do you clean it up?
All you need to go is back into your wheel bucket, stir it.
And you're good to go, re-spray or just come back and get
more foam that Signature Series Wheel Cleaner produced,
and just continue around the whole entire barrel.
So by cleaning up the barrel,
it's going to remove brake dust,
it's going to remove filth,
and you're always going to have a clean barrel whenever
you're driving down the highway,
especially cause this is a high-performance car.
You always want to keep it looking its best,
especially because the owner
is going to be renting out this car.
You always want your customers to have a nice car.
Whenever they're rolling down LA.
You guys can see how the Red Rocket contoured to the area
that's very tight right behind right here.
That is how cool the nylon bristles just fold.
And if you have intricate details, you could also bend it.
So you just need to bend it,
just move it side to side and that's bendable.
Go back.
You just clean the barrel of the wheel,
make sure you get everything clean,
scrubbing back and forth.
So now that I finished cleaning up the barrel of the wheel,
now it's time to get into the face of the wheel.
So we're going to start off by re spraying it
to suck out extra lubrication.
And then I'll get my Wheelie Brush.
I'll reactivate my suds as well.
All you need to do is just re-add pressure
and you're good to go.
So I'll get my Wheelie Brush, spray some on here,
and I'll scrub the face of the wheel.
So the Wheelie Brush has flag tip bristles on it.
That gets into all the cracks and crevices.
Obviously, there's going to be intricate details
that unfortunately,
aren't going to be able to be touched
with the Wheelie Brush.
That is why we have the All in the Details
Exterior Brush set.
The All in the Details Exterior Brush set
is going to allow me to get into all the
little cracks and crevices where the Wheelie Brush
unfortunately cannot get into.
So now we've got the face of the wheel.
Now it's time to get into the intricate details
with the All in the Details Exterior Brush set.
So we're going to get into the lug nuts,
clean everything up.
We're going into the caliber back here.
Now that I finished,
I'll put my brush off to the side,
my wheel cleaner off to the side as well.
And I'll rinse down the face of the wheel.
- So you guys can see Signature Series Wheel Cleaner
did an amazing job at removing the filth away from the face
of the wheel.
So I'll be spraying Signature Series Wheel Cleaner
around the whole entire tire.
And then I'll get a brush like the Nifty Brush,
just so I can scrub out old previous dressings.
So like this, whenever I come back to apply a new dressing,
it sticks and bonds properly.
So now that I finished scrubbing it, I'll re-rinse
the wheel.
- All right, guys, so I just finished cleaning
up all four wheels
on the M-4,
and I do want to show you guys how filthy
this water actually is.
So all of this break dust,
and filth was sitting on the wheel.
So now I'll be pouring it out.
Check that out. All of that is just filth.
So let me just turn the bucket that way.
So you guys can see all of that is brake dust, dirt,
grime, debris that was diminishing the look of the wheel.
So anyways, guys, it's time to get back into this video.
All right, guys.
So now that I set up my two bucket method,
my foam cannon and my soap that I'll be using today,
it's time to finally wash this beauty.
I got done with the wheels. Now it's time to wash it.
So today I'll be washing it using our two bucket method,
our Dirt Traps,
a Big Mouth Max Release Foam Cannon and Honeydew Snow Foam.
Honeydew Snow Foam is going to produce tons of foam.
That's going to cover up this beautiful car
in shaving cream-like foam.
And then whenever I glide my wash pad,
it's just simply going
to glide and not install any scratches or swirls.
So now it's time to set up our
Big Mouth Max Release Foam Cannon.
So our Big Mouth Max Release Foam Cannon works with any type
of pressure washer.
The minimum PSI level you need is 800 and a minimum gallons
per minute of 1.6.
So I'll be using Honeydew Snow Foam before I use it,
just shake it up.
Now I'll be inserting two ounces of soap, one, two.
Check out how cool it looks inside
our clear Big Mouth Max Release Foam Cannon bottle.
So now I will reattach the head,
and then I will stir it and not shake it.
Now, put this off to the side,
and now it's time to set up our two bucket method.
So on one side, it's going to have a red dirt trap.
And the other side is going to have a green dirt trap.
So like this I could distinguish,
which was going to be my wash bucket and which was going to
be my rinse bucket.
So on my left-hand side of your right-hand side,
it's going to be my rinse bucket.
Right-hand side is going to have some Honeydew Snow Foam.
So as always guys I'll rinse down the vehicle,
I'll foam it up using the Big Mouth Max Release Foam Cannon.
I will scrub it down with using the Chanel Wash Pad.
And then after that,
I will show you guys the results once I'm done.
So guys, if you guys liked this video today
and liked the results that I achieved
using the Big Mouth Max Release Foam Cannon,
an assortment of brushes that could clean the wheels,
and Signature Series Wheel Cleaner.
It brought back the shine, it brought back the reflection.
So anyways guys, go and pick up any of these products today,
hop on to our website right now, ChemicalGuys.com
or stop by your local Detail Garage, pick them up there,
And we'll see you guys next time
right here at the Chemicals Guys Detail Garage,
and as always,
thank you for sharing your passion for shine
with Chemical Guys.