- Why didn't we order like five more shells Ken?
We should have had five more shells.
Now you don't have to build a Switch with this goo on it.
So I am a big fan of the Switch Lite.
In fact, this is my daily Switch,
which is the super cool yellow.
And really what I wanna do here today is very simple.
Create the ultimate Nintendo Switch Lite.
So this is a very stock Switch.
All I've done is install a tempered glass screen protector
and I have a 256 gig micro SD card inside.
Oh, no, dropped it.
Okay, first off, we have a Bluetooth adapter for the Switch.
One of the biggest flaws with the Switch
and that goes for the Lite as well as the standard Switch,
is the fact that there's no Bluetooth audio.
Even though it has Bluetooth.
So with this little guy which is HomeSpot.
Wait, Ken why didn't you get the good one?
- [Ken] It is a good one.
It was 40 bucks, it has to be good.
- I think that there's another brand
that's better though.
Kev did a video on it.
Okay, let's find out.
This might be of slightly dubious quality.
Oh, you see, I see USB audio right here, okay.
It is now pairing, so let me grab my Bluetooth headphones.
- [Ken] AirPods, AirPods, AirPods!
- I'm not gonna go AirPods.
AirPods on a Switches is dumb.
I mean it sounds great.
It sounds exactly like any kind
of normal Bluetooth headphone.
Which makes sense.
Dude this feels totally fine.
I mean especially considering
that we have the low latency headphones,
this is a great way to get Bluetooth on your Switch.
However, oh, this is just the beginning
of our ultimate Switch Lite build.
Which, to be clear, is not an ultimate Switch.
Because that has more things that we can't do
like video out and what not,
which you can't do on the Switch Lite.
But besides that, this is the ultimate Switch Lite.
Which is my favorite Switch anyway, so it's fine.
- [Ken] There is no video out,
but I got the next best thing.
- Which is?
Is this is just a screen magnifier?
This is just a way to play Fortnite
on a bigger like zoomed in screen?
- [Ken] Oh, that is Fortnite?
- That is Fortnite, well, I mean,
I guess I know what game we're playing next.
How do you use this?
So this is just clip on? Oh wait, you know what though,
this might even not work with,
can we use this with the Bluetooth adapter?
No I need to have in the middle.
- [Ken] Yeah, no, why not?
- Put it over the adapter?
I guess there's no buttons on the bottom.
- [Ken] Yeah, no, do it, do it!
- Oh actually look at that, it actually clips on.
Okay, we're making progress here.
- [Ken] Jesus Christ.
- Oh, that's wow.
Wait, this actually is not bad dude.
This is not bad.
- [Ken] Does it different in person versus?
- No, what you're seeing on the camera right now
is pretty accurate to what I see.
So, just for reference
this what it looks like with it, that's without.
It's a pretty big difference right?
- [Ken] It Magnifies, it does it's job.
I'm killing someone with my pickaxe right now.
Okay, I lost.
The Switch ultimate project going very well right now.
What's our next item?
Woooooo!
The charging and cooling service?
What's this, how's it service?
This product has a 6000 milliamp Hour battery.
Please charge it through
the Type-C charging cable when charging.
Press the Switch button to start the fan.
So this is a grip slash cooler slash external battery
for the Switch and Switch lite?
- [Ken] Yeah man.
- How much was this?
- [Ken] 40 dollars.
so the messed up thing about this product,
is normally for building the ultimate,
we have a lot of really crazy things
to tack on to the Switch, or like whatever calls...
- They did all your work for you.
- [Ken] But that is literally all of them
in one product.
- what the (bleep) is this?
(laughter)
So we have a kickstand, okay?
You have a USB-C port on the back, two fans,
and then we have a USB-C port here
as well as a power button.
What tha, whoa.
- [Ken] You do your exercises too.
- (groans) Switching.
Actually I think I'll do that a few more times,
then we'll break, it already started feeling a little weird.
That feels, okay, all right.
And I'll hit the power button.
Oh, things are happening.
Whoa, do you hear how loud that is?
So essentially this is blowing
on the back of the Switch and the actual
sort of intake is right here.
So then now let me try to put my adapter in here,
I feel like it's not gonna work though.
Oh no, it doesn't even fit, it's got a little lip on it.
So I have to use wired headphones?
Is that what you're trying try to tell me right now?
like I'm a peasant with a normal non-ultimate Switch?
I will actually say, this grip feels a lot better
than the standard Switch Lite.
Which to me, while I like this portability,
it's always a little kind of crampy on my hands,
but that that feels really nice.
Do you think it's gonna reach? I think it's gonna reach.
- [Ken] It might.
- There, Ken!
So now I have to gently set it down on the table,
don't touch it ever again.
What is that?
Oh, a Switch controller, wait,
this is for the pro controller?
- [Ken] Yes. - Wait, how many things
am I clipping on to it though?
It's all gonna be too thick, right?
Oh, this feels terrible.
That's it?
(hiphop music)
So I've got it clipped to the back now.
This is all gonna explode,
if I touch it just the wrong way.
okay, so, I've got it tight.
- [Ken] I am impressed.
- The chunky boy, no I'm not done yet, I'm not done yet.
Can I do this upside down?
I think the laws of Physics are against me on this one.
(laughter)
- [Ken] That is literally everything
on the floor.
- Can I get a large roll of duct tape please?
(duct tape sounds) (electronic music)
What is that, what are you bringing in?
(soft growling sound)
You're just making my life more difficult.
Roboraptor's not gonna help, he's gonna yell at me
until I mess it up.
So, I now have a magnified screen
with a 6000 milliamp Hour battery and a fan
and grips which I'm not using
because I have a bracket to connect it
to the pro controller.
This is dumb.
I'm gonna to give it a try.
I'm actually kind of impressed
that this stupid little piece of plastic
is holding all those weight.
I will say, if you want a forearm exercise?
- [Ken] I've been really impressed
at how that looks from the front.
- Yeah, this is not that bad, right?
- [Ken] You don't know the tape's there.
- No, I've gotta say,
while I would get a little bit more magnification,
if the screen was farther back,
I actually feel like this is a more
sort of comfortable distance for it,
than the actual stock thing.
'Cause now I can actually look at it normally.
Before I wanted to do this, which looks weird.
I think we found some good things here.
However, none of this is remotely ultimate.
This is all dumb.
You know how to make the ultimate Nintendo Switch?
Well, I mean, if you've watched YouTube
over the last 18 months,
you know exactly what I'm about to say, time to hydro dip.
Disclaimer I've never hydrodipped in my life
and it's probably gonna look terrible.
So we begin our hydro dipping excursion,
we're actually going to take a little bit of a shortcut.
So while technically you should probably
just take apart your Switch,
however, we're going to not do that yet.
As you actually buy third party shells on Amazon
for like what, 15 bucks?
Now there are a couple of ways of doing it.
If you wanna be the cool YouTuber
and make the really cool thumbnail.
You'll spray paint in here,
but I don't want to get spray paint all over my desk,
so instead, we have, a, what do you call it?
It's like the hydro dipping film?
So we actually have ordered a wide variety of films.
I'm not sure what should we use.
Like this weird like, oh it's a Rick and Morty.
- [Ken] Never mind.
I can't read what that says, I'm Batman.
Oh, look at that.
Our Switches gonna be so cool.
It looks like a giant Dorito though.
- [Ken] No, no, no!
That's a thumbnail right there.
All right, let's put our super cool flames on.
Ready, set and look at that,
okay, there is water on top of it, is that okay?
- [Wes] Maybe.
- All right, here goes nothing.
So I'm gonna ease it in here.
Oh, no, that's not, nope, nope (chuckles)
That's not gonna work.
All right, we're gonna try do this very quickly.
So straight down, so, I'm not gonna breath that at all.
That's terrible, okay, cool.
No, I didn't work,
(percussive jazz music) (spray fizzing sound)
oh God.
- [Ken] This is very sad.
This is not how YouTubers told me it would go (chuckles)
- So, attempt number one didn't exactly end well.
It's almost like I rolled a fruit
by the foot on the Switch.
However, we've had a breakthrough.
And that we're morons, we were putting
the hydro dip film on the wrong way.
So you're supposed to put it face down,
which makes sense when you think that
the material goes up.
Look, okay, first time hydro dipping,
it's fine, we're gonna build
the ultimate Switch Lite today and,
Look at that, it actually like unrolls itself.
So 60 seconds or we can already see, look at that.
It's already kind of like warping and everything.
Okay. - [Ken] Give it a good coat.
- Here we go, that is the correct way of doing it.
Here we go.
Oh, it I fell apart.
Okay, that was too good of a coat.
- [Wes] Even coats men, what are you doing?
- Okay, all right, shall we go?
Everyone feeling good?
Okay, here we go and, that's not bad.
- [Ken] No, that's pretty bad.
That's the same thing as earlier.
- I mean no, look, part of it's pretty good.
That's fine, right?
It's so sad, that was so much better than the first one.
Look at the difference.
We went from one to two.
But okay, thankfully Ken thought ahead
and we have one backup plan to make this
even more ultimate then this disaster.
So, let's cut out the part
that we just did the hydro dipping.
So if you just, I'll just step over here
so people can't see that part.
We're gonna pretend that that never happened.
Okay, so next step is we're going to be doing
a clear shell conversion for Nintendo Switch Lite.
Now some people might try to paint the the Switch.
However, what we're doing today is we're going
to make it clear, because this is the way to do
an ultimate Switch Lite is just to do it clear.
So I hope that this is easy to take apart.
It seems to be easy so far.
So because this Switch Lite is fairly new
and these shell replacements have just come out,
as far as I know, there's currently no tutorial
on how to do this.
So I'm just gonna figure it out.
I'm making progress, see, I've opened a thing or two.
Here we go.
(upbeat funk music)
- [Ken] Easy enough.
We now have the inside of our Switch Lite.
This I think should be a pretty straightforward swap.
So you can see it doesn't look
like anything too crazy on the back.
We do actually have some yellow components,
which should show through nicely.
But it's pretty much just this sort of metal backplate.
So roughly, that's what it's gonna look like
once we have the clear shell on.
I actually don't totally hate
the idea of yellow on the front and clear on the back.
So you see how I'll like micro SD flap,
I can just remove this mechanism and just put it on here.
That look okay, right?
With a little bit of yellow and clear mixed.
Yeah, okay, I'm gonna do that.
Yeah, look at that, there we go.
So now we have our yellow power button,
volume rocker, game card slot, and micro SD.
Let's get this thing on now.
- [Ken] Oh, wait a minute.
- What?
- [Ken] What you should totally do.
- What should I do right now?
Boom, Look at that.
Oh, yeah, look at that dude, this is actually cool.
I mean, I knew as of course, the owner of this video
and the person who put this title up here,
I knew it was gonna be good.
I'm not surprised in any way right now.
Let me throw in my micro SD and the game card
and make sure this all fires up.
And then we can reassemble the ultimate Switch.
And hopefully it still works.
I mean, it'd be weird if it didn't turn on
'cause I didn't touch anything on the inside.
Come on, that looks pretty good, right?
Look, can't you see how great our shell is?
It's like almost like you can't even tell we did any thing.
So we have the ultimate Nintendo Switch Lite,
with a magnified screen.
Giant battery, fans, pro controller and a custom shell.
So you can get this video directly to your sub feed
by subscribing at youtube.com/AustinEvans.
YouTube has this handy notification system
where they will send you a notification free of charge,
every time I upload
a wonderful piece of content such as this.
Don't you wanna see more?
Hit the subscribe button, ring the bell.
Until next time, Ken will be back with more dumb ideas.
I however, have nothing but good ideas.
So we're fine.
Remember good ideas, bad ideas.