It's very honor that they were going to make up some concrete slabs and going to use
These moles which are bought from ebay the tribal ancestors first only made up to concrete slabs got a vibrating table there
So that's going to strengthen our
concrete and take all the air, but with a bit of luck because the more
Slab molds here plastics ludmuller's got the fans and gravel to mix up our concrete
Plus the cement is inside and we'll start mixing up the concrete now
Right so we go one it's one part cement
Two parts and a three parts gravel or aggregate that's mixed so I just going to mix it be getting with this
tool
that will add the water and
Before I add the wall, so I'll put a little bit of washing-up liquid and some concrete bondo into the net
so here goes
Washing up liquid just a little bit
And I'll just add a touch of water to get back down and we'll start mixing again
We're going to get a trowel and see if you've mixed a woman
Wanna make sure there's a strong mixture there for the draw next
There we go again with the mixer now
touch more waters about next
you
Right so now we're ready to pour this into our plastic concrete slab bulk
and I'll put on top of the vibrating table and
I
Should be job done
right so we've got the plastic molds of the sun, and I'm going to put on top of the vibrating table and
We're going to scoop our concrete mix into the mold
by the way folks when you're
molding these slabs don't forget to spray some mold release for a
silikal treatment, it's ready to go a
few scoops in first and see how economist
I'ma turn the vibrating table on that
So everything that's pretty good. I'm going to say my side
I'm to cover up some plastic, and then we leave that for a day or two
And then maybe mold it all of our latest labs to do so what do you value means?
I'm going to have a look at those as well
There we are
Those labs done covered up the big ones which
Obviously we did in the video, and there's a few small ones there you just got to cover those up
as I have here with the other slabs with some plastic bags and
We'll be mold amytal tomorrow. Maybe the next day the scale goes
right in a few moments
Right so here goes to the unveiling of the slabs I've left the mirror for a couple of days
I try to take a couple of small ones out yesterday, but it's a bit premature were there
So one is that you already taken out yesterday. So wait for just under two days. So they should be alright to
Come out of the molds now. So here goes
Right so they get the big slabs out of course one of those is one of the ones we casted up
Going to tap them up with a hammer we've only got this hammer here for the moment
But you want a rubber mallet really I've got a rubber mallet somewhere, but account flying there
so
Just ignore me using this metal hammer
There he goes
well
That was a little bit hard work. They got those to do
Anyway, these slabs they've turned out a treat
beautiful just going to zoom in there and
That's the men well the concrete
Is really compact and Air bubble free really solid?
So what we're doing is we'll wrap these up
in plastic bags keep them moist and
Let them continue curing for around a month, and then they'll be ready to use
there's obviously a variation of
slabs there with a wood style
flank aspect which are quite light there and here's a couple of
or a few
as loves they should pull down the mold too early so that gives you an idea of
What not to do then for them out too early and obviously take a concrete mix?
right which is
One part cement two parts and three parts gravel, and I should give you a really good
Solid mix along with the vibrating table
you'll get a really good air bubble free and compact very strong mix and then obviously I'm
Keeping moist for a month to cure fully right so now wrapping up now
And there's the molds obviously keen up your molds after you've finished casting ready for the next batch
Alright, so there. We are they're all wrapped up quite. Heavy. I think we'll make smaller ones in the future
I'm going to have a cup of tea now
Right okay, thanks for watching and over and out
you