- [Voiceover} Shock is the decrease of perfusion of tissues.
Or, in other words, it's the decreased delivery of oxygen
to different organs of the body,
and perfusion, this delivery of oxygen to the body,
is essentially equal to the amount of flow,
so the amount of blood flow that gets to the organs,
over the amount of tissue that is being delivered to.
So, for example, flow could be in measurements of
maybe milliliters or liters per minute,
so a volume per unit time,
and the amount of tissue is measured in mass,
so maybe grams of tissue, and
this can be really any tissue, maybe 100 grams of kidney.
It is the amount of blood
that goes to that amount of tissue.
However, there is another way to figure out perfusion,
oxygen delivery to the tissues.
So, perfusion is actually proportional
this is a proportional sign, to cardiac output.
That's the amount of blood the heart puts out per minute.
It's also proportional to the systemic vascular resistance,
and this is the resistance of blood vessels,
and also the amount of oxygen, O2, content in the blood.
So, let's go ahead and dive deeper
and take a look at these different factors
that can influence the delivery of oxygen
and perfusion of the cells.
So, cardiac output can be determined by two things.
It can be determined by the stroke volume.
So, let's take a look at the heart that I have over here.
So, stroke volume is the amount of blood
that escapes the heart per beat.
And the other factor that influences
cardiac output is heart rate.
So, looking at the units of both of these,
stroke volume is measured in liters per beat,
so that's how much fluid escapes from the heart
with each beat, times the heart rate,
which is the number of beats per minute.
And, so doing some simple arithmetic, these two cancel out
and you see that cardiac output is liters per minute.
So this is the measurement of cardiac output.
And you can see in our equation up here
flow has a similar unit, liters per minute.
So, cardiac output really determines the flow of the blood.
The more the heart squeezes to push blood out
and the faster it does this,
leads to increased cardiac output
and, therefore, this leads to
increased perfusion of the body.
So, a better pump leads to better
delivery of oxygen to the tissues.
Now, heart rate is fairly self-explanatory.
This can increase or decrease
based off input from the nervous system.
But stroke volume, let's break this down
a little bit further.
Stroke volume can be broken into three different parts,
preload, which is the amount of blood
that is in the heart at the beginning of a contraction.
So, it is blood that is loaded in the heart
before, or pre, contraction, before it squeezes.
Stroke volume is also determined by afterload,
which then, makes sense, is the amount of blood
that is remaining in the heart after it squeezes,
and contractility, and contractility is a measurement of
how well the heart can squeeze.
So, increased contractility means the heart
can squeeze a little bit better.
So, let's look at a quick example of
maybe something like hypovolemic shock,
where the body has low blood volume.
Low blood volume means that blood
returning to the heart is decreased.
There is actually a lower amount,
so less blood getting into the heart,
maybe only a little bit makes it in,
means less blood can be squeezed out.
In the same token, if there is more blood,
let's say there is more blood,
remaining in the heart afterwards,
that means less blood was squeezed out
so there was less stroke volume.
So, the equation for stroke volume actually makes sense.
Stroke volume is the difference between the amount of blood
that started in the heart before it contracted
and the amount of blood that's left in the heart.
So, stroke volume is preload minus afterload.
That difference is the amount of blood
that escaped the heart with one beat.
And, of course, if the heart has greater contractility,
it can squeeze harder and force more blood out.
Now, resistance of blood vessels,
systemic vascular resistance,
so that's the total resistance of vessels in the system,
also plays a role in perfusion, as I said before.
And the way you can think about that is
by looking at blood vessels, because blood vessels
are like pipes, and that is how blood
is delivered to the rest of the body.
Now, what is resistance?
Well, resistance is the ability for the blood vessel wall
to push back against the blood.
So, essentially, the blood vessel wall
acts like a trampoline, and just like a trampoline,
if you're bouncing up and down on the trampoline,
if the trampoline material is tighter,
you can bounce higher, and so blood
behaves similarly in blood vessels.
If it bounces against the wall, it can bounce back forward,
and this pushes blood forward through the system
and allows better oxygen delivery and, therefore,
greater perfusion to the cells of the body.
Now, there are different factors
that can influence resistance, but really the greatest way
that our body can change resistance is by
changing the diameter of the blood vessels.
Having a smaller diameter means more resistance
because blood has more opportunity to bump up
against the walls and bounce forward.
And so, therefore, a smaller diameter blood vessel
means increased vascular resistance and, therefore,
greater and better perfusion to the rest of the body.
So, cardiac output, systemic vascular resistance,
and, finally, oxygen content.
That is the other big component of perfusion.
If there is more oxygen content in the blood,
tissues can be perfused better
because more oxygen can be delivered to the body.
So, keep in my mind these three parameters
when are you thinking about
shock and perfusion to the tissues
because shock is decreased tissue perfusion.
Now, there's one final point I want to make,
and it is in the equation for blood pressure.
Specifically, we look at mean arterial blood pressure.
An equation for this is cardiac output times
systemic vascular resistance plus central venous pressure.
Now, central venous pressure is usually low,
so this side of the equation is usually neglected.
And you can often just think here that blood pressure
is equal to cardiac output times vascular resistance.
Now, it is also worth mentioning that
blood pressure can also be found by assessing through
a sphygmomanometer.
That's the little blood pressure cuff
that physicians put on the arm of a patient.
Whereas in this equation the mean arterial pressure
equals cardiac output times systemic vascular resistance
is a way to figure out blood pressure hemodynamically,
another way to measure blood pressure is using this cuff.
Blood pressure is calculated by adding
two-thirds of the diastolic blood pressure
plus one-third of the systolic blood pressure.
So this gives the mean arterial pressure in a different way
by using a blood pressure cuff.
And note the reason I am going over this is, as you can see,
look, cardiac output and systemic vascular resistance
are factors that influence perfusion
as well as factors that influence pressure,
so very often patients in shock will have
a lower blood pressure while at the same time
they aren't able to adequately oxygenate their tissues.
So, again, it is important to consider these
different factors when thinking about shock
and decreased tissue perfusion.