A rookie singer who appeared like a comet , Cookie
, a singer-songwriter who can write lyrics and compose Cookie
A colorful cookie sprinkled with colorful
toppings A passionate cookie that wants to sing until the end even if the topping melts
Music is my life
Topping is my life
Parfait~~~~~Cookie
This time Let's make love cookie parfait
cookies decorated with toppings more gorgeously than anyone else . First
, build up about eight layers of filament along the
face pattern, and make a slightly convex shape in
the middle to create a
soft face shape.
Imagine a state with your arms straight
and draw a leg that is shorter than your arm.
But isn't this too short?
rather good
The gibbon
is piled up five layers as it is, filling the flesh, and the
body is also piled up.
Now what's next?
It's time to bake in the pocket oven.
Press it with a preheated iron tool to make it flat, and on the
face side , make it soft by attacking the corners.
Ah! Conversely.
Gibbon ~
Shoot the filament on the empty side and
press it lightly to make it densely full.
I use the burning pen skill to trim with the nib to smooth out the
angular corners.
Fill the arms equally densely
and rub them with the burning pen skill.
The burning pen skill is a basic 3D pen that can make shapes with only a pen, so it is
better to learn it. Oh, of course, if you use an ironing tool, you
can trim it more easily, but
it is better to use
these paid items that cost a lot of electricity
only when absolutely necessary.
Cut the extruded filament with a nipper
and smooth the surface with sandpaper.
The standard for creating a smooth surface
is to use coarse sandpaper at first, then
gradually change to fine sandpaper and sand it
sequentially .
Now, I'll put on my safety glasses and give you some electric sandpaper.
This is also a paid item that costs a lot of electricity.
But in my age group, it is more advantageous to save stamina
than to save electricity bill .
Hmm~ OK, I
sometimes check the process by putting the parts together.
oh the opposite
Sleeved source oi
arm is then given for an end to the angle cut
melt the surface the iron tool,
main surface as attached to the body
itseu be attached without adhesive
side before tableware
give cut according to the length of
the other side homman to gyupa cutter in this state Paju Bend it inward.
I'm going to make one arm a movable type that can be played with a guitar, and the other a stationary type
.
Next up is the skirt.
Skirt is made simple by applying the cone formula
used to make latte-flavored cookies .
Then, press it with the ironing tool to straighten
it out, and wrap the ends to
make a cone like this.
Press and flatten the folded part with an iron tool
, sketch it in the shape of a petal,
and cut it with a scallop cutter.
Remove the cut part and
blow off the top with a scallop cutter once more.
It's so easy to make a skirt.
Next up is the bridge.
First, poke the toe with a wood burning tool to make a hole,
dig deeper with a pin vise, and then insert a
micro magnet.
After that, I lightly shoot filament on my toe and
press it lightly with my fingers before it cools down to make shoes.
The other side is made in the same way,
but this time, without inserting a magnet, just drill a hole.
If you make a shoe with a pin vise embedded in it
, the hole will melt even with hot filament and
will not be deformed.
Now attach the legs to the body.
Itjyo time to rub over the adhesive paste so give
so give pasted
onto yoreotge
not adhere well.
In this case , use a secondary slime that
can hold the adhesive until it dries .
Is that girl right?
Yes, that's that girl. If
you attach the parts together with the auxiliary slime like this
, you can keep it stable until the adhesive dries.
Kya-
We make the sleeves that
are the fashion point of parfait-flavored cookies
from another world .
I take a drawing, put it in a pocket oven,
press it with an iron tool to flatten it out,
and wrap it around a stick to make a sleeve shape.
Now cut off the remaining part with a nipper and
melt the seam to remove it.
The reason I'm making the sleeves separate like this is
because I'm going to make the sleeves move.
When I make a figure, I
try to make as many moving parts as possible.
(Filament) Due to the nature of the material, it can be precisely shaped and
has strong durability, so it is specialized for moving.
This is the biggest advantage that 3D pen making is different from other making!
If you attach the made sleeve to the tip of your arm,
oh oh, this is...
Bongsan Mask Dance flavor cookie?
Whoops!
Suddenly, the body is taking shape.
They have magnets on their feet so
they can stand on their own.
head this time.
First, cut the back hair into a waffle shape.
Also, please pick all the middle hair, bangs, and mulberry.
If you make them separately, you can partially modify them, and
making them is much easier than you think.
Before I do the hair, I finish the body side first.
Make a pillar joint by drilling a hole in the neck
and insert the head.
Then, apply masking tape to cover the back of the head, back, and
skirt.
uh?
Pastry flavored cookies?
Now I have to put my head on, but I'm going to
need a place to lie down.
did you find me I
'll give you one more chance, so don't be fooled.
Oki~
Lay the parfait-flavored cookies on top of the bed slime
to get a comfortable posture for hair transplantation.
Kya-
222
I'm summoning a volume slime
to attach the back hair and add the back
hair ponytail, but would you put it in your head?
That's non-
no ~ I don't put it in.
A newly developed volume-up skill
volume slide.
Volume Slide is a skill used to quickly partially create
such a voluminous skeleton . It is a
production method of attaching the skeleton to the
slime according to the curved surface
by applying a volume slime to make half the skeleton, then sliding it little by little and pulling it back
. Now, here, I use the furrow skill to make the skeleton stronger
. A morale skill that strengthens the skeleton
without significantly increasing the volume of the existing skeleton
!
Because the filament is inserted inside the skeleton and the
empty space is used to strengthen the skeleton, the
volume does not increase significantly.
Now attach the middle hair and
stand the sideburns forward before it cools down.
First, apply cotton to the entire hair
and check the lumpiness.
It also makes the necessary lumps in between.
The top hair is a bit thin.
The high-mo skill that fills in thinness quickly creates thinness.
Now, let's apply the finishing surface with the plastering pen skill.
Lay the filament and press it with the heat sink.
Lay the filament and press it
with the heat sink,
lay it, press and repeat.
Using this skill to lay the face
makes it very easy when working on the surface as
there aren't many jagged lines in the filament
. A smooth surface can be easily obtained
by lightly rubbing the surface with a fire property
. Because these devices look
hwasokseong change the thinking from those who fear the 3D pen
ready to start gyesinde
doeneunge you a few hwasokseong equipment making three pens.
Recognition?
Hmmm
, the hair has been transplanted abundantly.
Apply masking tape to the forehead once more
, make and attach the bangs
, and attach the skeleton to the ponytail hair to fill the volume.
Now it looks like all the big chunks are made.
We take off the finished hair and have
time to sand it with happiness.
Sanding feels good when
sanding is the last part of the build .
makes it hard
oh my hand hurts
Other next time.
Stack them up three layers according to the shape of the guitar
, and make two semi-cylindrical columns with thick lines for Roly Poly and Pepero,
and then connect them together to form a cylinder.
After collecting the original blueberry,
wait for a while...
Now!
Casts the snot roll skill.
Are you all at max level with this skill?
Grab two semi-cylindrical pillars and rub them with a fire element
to make a Pepero.
The round blueberries are
melted once more with a lighter to shape them, and if you give
them enough light so they do n't burn, they'll be perfect.
I make apples too, what
is this?
Cherry on top of whipped cream is
also made at once.
It looked like there were a lot of toppings, but I
made it sooner than I thought.
Now, Parfait Cookie's weapon You
can make a guitar very easily
by putting a nice guitar in a pocket oven, rubbing it
, sketching it with a pencil, and cutting it with a gyupa cutter .
Now let's wrap up all the parts.
Heat the skirt seams, attach the arms, play the guitar,
and cut off the wrists after the
seat cod .
Let's go.
Pillar
hole joints
left sleeve
holes silpin
forearm
fixed
right leg
left leg
right sleeve
writers
JESUS
cutting
Writer
fixed
facial
hair wig
bangs
Mulberry
fruits and sweets to give up moderately topping
the other squeezing give
complete!
Guitar movement is also possible.
Good!
Now it's healing time.
It's time to put on some gorgeous colors.
Coloring time is the most fun for me.
I think it's time to draw a picture on a 3D three-dimensional canvas.
When coloring delicate parts,
you can prevent 98% of hand shake by holding
your little finger upright and attaching it to the other finger .
The remaining 1% that prevents hand shake is confidence.
The last 1% is the heart to enjoy the process.
The most important thing is to enjoy the process and work with the
mindset that 'if you make a mistake while painting, you can fix it' .
After sketching the face with white paint, paint it in
detail, and
finally, apply glossy varnish to the syrup and eyes.
It's not over yet.
You have to create a stage where parfait cookies can sing their favorite songs to their heart's content,
right?
Get a plastic box that rolls around the house
and build an automata device that
converts rotational motion into vertical motion .
And with this specially crafted transparent ring, the
Parfait Cookie's arm and device will be gently connected.
The hole I drilled earlier
was designed for fixing to the automata device.
When you turn the knob, the
parfait cookie plays the guitar.
I was trying to make a great stage by
colorfully coloring the automata device, but at this point it was too difficult, so I made an
outdoor busking stage very simply.
My stamina is low these days, so
I think it takes twice as long to work.
Please support us by liking and subscribing.
Please like and subscribe~
Now, Parfait Cookies!
It's debut time.
Go!
The first stage is always terrifying.
I will sing with all my heart
Let's enjoy Parfait Cookie's debut stage together
. microphone test.
Let's sing together
~ Parperapo~ Pyongpyeong~♥
Thank you for your support.
Pyong~♥
Cheongpa-nim who provided animations of wonderful cookies.
Thank you!!
Then please look forward to the next video.
♥Byong♥