Hey, DIYers.
Jarrett with Alarm Grid here.
Today we're going to discussing why you're not receiving flood
notifications from your Honeywell Lyric
system with an Apple HomeKit.
Now, the reason why you're not receiving those flood
notifications from your Honeywell Lyric in a HomeKit
is because any type of flood zone or flood sensor
is programmed as a 24-hour auxiliary response type.
Unfortunately, Apple HomeKit doesn't support the option
to be able to send you a descriptive
notification for that type of response type,
or even flood sensors in general because Apple HomeKit only
supports certain response types to send you
a descriptive notification.
The response types that it does support
is Entry Exit 1, Entry Exit 2, Perimeter, Interior Follower,
and Interior with Delay.
Now, flood zones are normally programmed
as a 24-hour auxiliary response type
because you definitely want to make sure
that if that sensor were to be tripped,
or there is a flood, or anything,
you want it to immediately notify your Honeywell Lyric
system instead of having it set up as an entry/exit,
or anything like that.
Now, 24-hour auxiliary response types,
they do automatically set off an audible alarm
on the Honeywell Lyric system.
But because Apple HomeKit doesn't support the option
to give you or send you a descriptive
notification for that type of response type,
it's going to show up as a general Lyric system alarm.
Now, the general Lyric system alarm
will at least let you know that the alarm has been tripped,
but it's not going to tell you exactly what zone or what
sensor tripped the alarm.
Now, there is something you definitely
want to keep in mind if you do have a flood sensor programmed
in your Honeywell Lyric system.
You at least want to let your monitoring station know
that that specific zone is programmed as a flood sensor,
so that they know that that is a flood sensor setting off
the alarm.
If not, they could possibly get it
confused with a medical alert.
So you definitely want to keep that in mind
whenever you're using a flood sensor with the Lyric system.
Now, if you did want to set up the general Lyric system
alerts within Apple HomeKit, you are
able to do so within HomeKit itself.
You do have to set up the notifications
in order to be receiving the notifications.
Normally when you do set up HomeKit,
it's not automatically set up.
So you do have to go in there and set that up.
So to do so, what you want to do is open Apple HomeKit.
And then you'll see Default Room Lyric.
So normally, the general Lyrics system alerts
are basically all grouped up within that category.
So if you did want to enable the notifications, what
you're going to do is you're going
to tap Edit in the top right.
And you're going to tap Default Room Lyric.
And then you'll see all these options right here.
So what you're going to be looking for
is actually Status and Notifications.
And you'll see Include in Status and Allow Notifications.
So if you did want to receive the notifications,
you'd need to make sure that both of these are enabled.
Once you have enabled them, then you
should be able to receive notifications.
And then if you did want to have other people receive
the notifications as well, then you just tap on People.
You have those options right there.
And then if you wanted to receive notifications
at a certain time, or anything like that,
you're going to tap on Time.
Now for general Lyric system alerts,
I would not suggest choosing a specific time
to receive these notifications because it is very important.
But once you have configured the settings the way
you want to, what you're going to do is hit the back arrow.
And then you're going to tap Done.
And then to completely be done, you're
just going to tap Done again.
And you have now set up the general Lyric system alerts
within Apple HomeKit.
So now what we're going to do is we're
going to trip this sensor so that it
will set off the alarm for the Honeywell Lyric system.
Now, just to basically remind you,
we do have this sensor programmed
as a 24-hour auxiliary so that it basically
mimics a flood zone.
So once I trip the sensor, it'll set off the alarm.
And you'll be able to see the notifications that do pop up.
[ALARM BEEPING]
Alarm.
Backdoor Water Overflow.
[ALARM BEEPING]
Disarmed.
Not ready to arm.
Check zone.
[BEEPING]
Disarmed.
Ready to arm.
Time.
[LOW BEEP]
So as you can see, now we have the notifications from HomeKit
and Total Connect 2.0.
Once I tap on HomeKit, you'll see that the Default Room Lyric
was triggered and was disarmed.
Again, it's not telling you that there was a flood zone that
basically tripped the alarm.
You're getting that general Lyric system alert.
Now, when you open up Total Connect 2.0,
you'll see that your alarm is sounding.
The backdoor flood sensor alarm has been reported.
You have alarm has been canceled after I
have disarmed the system.
And then you'll see that the backdoor flood
sensor was disarmed or cleared.
So as you can see, Total Connect 2.0
has more of a descriptive notification when that flood
center is tripped compared to HomeKit, which just basically
gives you a general Lyric system alarm.
Now, I also did receive a text message notification
from Total Connect 2.0, as well.
And it does give me a description, as well.
It does tell me that the Lyric Sensor 7 backdoor flood
sensor has been triggered.
And it does tell me that the Lyric Sensor 7 backdoor flood
sensor has been cleared and disarmed, as well.
So it does give me a text message notification letting me
know exactly what is going on.
It tells me what zone and what sensor did set off the alarm.
And that is why you are not receiving flood notifications
from the Honeywell Lyric system in Apple HomeKit.
If you have any questions about the Honeywell Lyric
or alarm systems in general, please
contact us at support@alarmgrid.com
or go to our website, alarmgrid.com.
If you found this video helpful, please like and subscribe.
For notifications of future videos,
please click the bell icon.
This is Jarrett with Alarm Grid.
You have yourself a great day.