- [Voiceover] So I have the graph of y is equal to
f of t here, our horizontal axis is in terms of time,
in terms of seconds.
And this type of function is often described as
a square wave, and we see that it is a periodic function,
that it completes one cycle every two pi seconds.
And so we could say its period is equal to two pi,
if we wanna put the units we could say two pi,
two pi seconds per cycle, we could write it like that.
We could also just write s for seconds.
And its frequency is gonna be one over that.
So we could write its frequency is equal to one over
two pi cycles per second, cycles per second,
it could also be described as hertz.
And what we're gonna explore in this video,
is can we take a periodic function like this and
represent it as an infinite sum of sines and cosines
of different periods or different frequencies?
So to write that out a little bit more clearly,
can we take our f of t, so can we take our f of t,
and write it as the sum of sines and cosines?
So can we write it, so it's going to be sum,
let's say baseline constant, that'll shift it up or down,
and as we'll see, that's going to be based on the
average value of the function over one period.
So a sub zero, and then, let's start adding
some periodic functions here.
And so let's take a sub one times cosine of t.
Now, why am I starting with cosine of t?
And I could also add a sine of t,
so plus b sub one, of sine of t.
Why am I starting with cosine of t and sine of t?
Well, if our original function has a period of two pi,
and I just set up this one so it does have
a period of two pi, well it would make sense that it
would involve some functions that have periods of two pi.
And these weights will tell us how much they involve it.
If a one is much larger than b one, well it says,
okay, this has a lot more of cosine of t in it,
than it has of sine of t in it.
And that by itself isn't going to describe this function,
because we know what this would look like.
This would look like a very clean sinusoid,
not like a square wave.
And so what we're gonna do is we're gonna add sinusoids
of frequencies that are multiples of these frequencies.
So let's add a sub two, so another waiting coefficient,
times cosine of two t.
This has a frequency of one over two pi,
this has twice the frequency,
this has a frequency of one over pi.
And then a sub three times cosine of three t.
And I'm gonna keep going on and on and on forever.
And I'm gonna do the same thing with the sines.
So plus b two sine of two t plus b three sine of three t.
And you might be saying, well, okay, this seems like
a fun little mathematical exercise,
but why do folks even do this?
Well this was first explored, and they're named,
series like this, infinite series where you represent
something by essentially weighted sines and cosines,
this was explored originally by Fourier,
and they're called Fourier Series.
And they were interesting to him in the study of
differential equations, because a lot of differential
equations are easy to solve when you involve sines
and cosines, but not as obvious to solve when you have
more general functions, like maybe a square wave here.
But if you could represent that square wave
as sums of sines and cosines,
then all of a sudden you might be able to find
more general solutions to your differential equations.
Another really interesting thing about this,
and this is really the foundation of signal processing,
it's very used, it's heavily used in electrical engineering,
is you can view these coefficients as they are,
they're weights on these cosines and sines,
but another way to think about it is,
they tell you how much of different frequencies
that this function contains.
So, for example, if a one is much bigger than a two,
then that tells you that that function contains
a lot more of the one over two pi hertz frequency
than the one over pi frequency.
Or maybe a three is bigger than a one or a two.
And so you can start to say, hey, this helps us
start to think of a function not just in terms of the time
domain which f of t does, but it can start bringing us
to saying well, how much do we have of each frequency?
And as we'll see with Fourier Series and eventually,
Fourier Transforms, that's going to get us into
the frequency domain, where we can start doing
some signal processing.
So we're going to explore all of that in future videos.
In order to understand how we can actually
find these coefficients, we're gonna review a little bit
of our trigonometry, especially integrating trig functions,
and then we're gonna solve for these,
and we're gonna see how good we can approximate
our function f.