installing ikea kitchen on the cob LED lighting for kitchen worktops the
onslaught LED lighting comes in three lengths 80 60 and 40 centimeters
completed with an electronic LED power supply with wireless receiver one power
supply cord one intermediate connection cord to connect several lights together
with only one connection to the main supply normally to use more than one leg
power supply one remote control that turns on or off all nighting units
connected in a chain simultaneously in this example for our lot LED lights
totalizing 30.7 what's of output 1 power supply of 30 watts is enough to use more
LED lights is advisable to use more than one power supply
now let's start with DIY images starting with the unboxing then taking measures
and next with the installation itself so keep watching and if you find this video
helpful give a thumbs up and if you have any question leave your comments below
start by finding where you want to mount the LED light
yeah
now go ahead and find the center of the wall cabinet next cut the gutter
accordingly to the same length then stick it in the cabinet
now go ahead and screw the LED light support into the base of the kitchen
wall cabinet measure the other side of the cabinet and trace a line with a
pencil you can do this for all cabinets and one step if you prefer then position
the LED light support and Mark the holsters crew now a great tip is to make
a hole within all it greatly helps the screwing procedure
now go ahead and attach the LED light from the bottom of the wall cabinet
start by passing the why behind the cabinet until reaches the top of it if
you do not find room to pass the wire behind the cabinet you can always make a
hole and pass the wire inside have the same result
yeah
now position the light and press firmly until you hear a click
position the wire in the gutter and follow this steps for all unlocked LED
lights
yeah
now with the power supply on top of the cabinets
we're going to connect all on love LED lights in this setup i only need a power
supply with 30 watts if the output total of all lights exceeds this value for
more than 23 wats i will need two or more power supplies to connect two or
more power supplies we need the inter connection cable that i mentioned
earlier and in the end of this video you can watch how to connect two power
supplies now with all light attached to the power supply plug the power cord and
next we going to pair the wireless remote control with the power supply
yeah
present this type of light spot on the power supply and then press the button
on the remote control until both LED lights blink arrange the cables to stay
hidden from view and it's done now preparing food and doing kitchen workers
safer easier and more fun with or even light across your worktop to install
more than one power supply it's needed the and salute or intermediate
connection cord connecting one to another it's easy it's possible to
divide various LED lights on both power supplies
and then simple connect both power supplies with the intermediate
connection cord attached the power supply cord then pair both with the
wireless remote control and you are ready to enjoy your kitchen worktop with
the on la bled lightning i hope this video was useful to you if so give a
thumbs up subscribe if you haven't already and I see you in the next videos
thanks for watching
Cheers
yeah