Hello everyone and Welcome to HowFixit. In this video I gonna
show you how to disassemble the Razer Blade 15 RZ09-02705 (2018) Base Model laptop,
clean it from dust and replace thermal paste.
To disassemble Razer Blade 2018 Base Model you will need next tools:
Phillips 1 screwdriver Torx T5 screwdriver
Plastic tool Tweezers
Antistatic brush Thermal grease
Also I recommend using a magnetic mat in repair process and laying out each screw step-by-step
during disassembly, which is especially useful in the case of the Razer Blade 15 RZ09-02705. This
laptop has a lot of screws of different sizes and it is very important not to confuse them
during assembly. In the description, I’ll leave links where to buy all the necessary tools.
Turn the laptop over and remove all the screws on the bottom cover.
Disconnect the battery cable from the motherboard.
Now let's begin to the removal of the cooling system.
Disconnect fan cables. Remove all screws on the cooling system.
Now let's begin cleaning the cooling system from dust. Remove all dust from the radiator and fan.
Pay attention to the order of removing the screws; I recommend unscrewing in the indicated order.
Now you can remove cooling system by lifting up from the motherboard.
Remove the old thermal paste from the surface of the CPU and GPU, as well as from the radiator.
If thermal grease is very dry and doesn't rub well, you can use isopropyl alcohol.
How to apply thermal grease. Apply a small amount of thermal paste to the processor,
then take a plastic tool and spread it evenly over the entire surface of the chip.
If you still don’t know which thermal grease to choose, in the description, I left a link
to the video where I test different thermal greases and choose the best one for the laptop.
If your Razer Blade 15 2018 Base Model laptop is still overheating after cleaning and
replacing the thermal grease, I recommend watching a video about the cooling pad for the laptop,
or how to undervolting CPU and GPU to reduce heat and increase laptop performance.
All links you can found in the description. Now you can install the cooling system and
tighten all the screws. Well, that's all,
you were on HowFixit and see you guys next time!