Hello everyone, welcome to ReTwisst channel. In this video you will see how to make a Wall hanging with ReTwisst Rope Yarn.
You need 1x wooden dowel and 2 pcs of ReTwisst Rope Yarn. (Mine is 4 mm)
Attach the wooden dowel to the hooks
Cut and make ready 10x Rope Yarn of 175 cm each.
Fold and attach the yarns with lark head knot to the wooden dowel
Fold and attach the rest of the yarns with the same steps to the wooden dowel
After attaching all the yarns, separate the yarns as 2 pcs and leave a space between them
After getting them ready, start by making a square knot
Fold the right strand over the centre of two strands then take the left strand and place it over the right strand behind the centre of two strands and up through the loop then fold the tighten. The first half of square knot is done.
Repeat the same process on the other side but this time start with the left strand
Make the same square knots with other yarns as well
Continue to knot the second line, skip the first 2 strands to decrease the knot quantities
Take the next 4 strands to make square knot as in the previous line. Leave a space between the first and second lines and make the knots a little bit loosely this time
Repeat the same process on the other side and start with the left strand to complete the square knot
Take the next 4 strands to make square knots and complete the second line by leaving 2 strands at the end
Continue to knot the 3rd line and leave the first 2 strands at the beginning without knotting. There will be totally 4 strands aside.
Take the next 4 strands and make a square knot by leaving the same space as in the previous line
Take the next 4 strands and continue to make square knots
Leave 4 strands at the end as at the beginning
Continue to knot the next line by skipping 2 lines at the beginning and make square knots. Leave 2 strands at the end.
Here is the last line, make the last square knot by leaving 2 strands at the beginning and end
Cut and make ready 40x yarn of 85 cm each.
Fold and attach the yarns with lark head knot to this point
There are 8 points like this, attach 5x yarns to each of them
Attach 5x yarns here by following me
Continue to attach 5x yarns to the next places
After attaching the yarns and making them ready, cut 4x Rope Yarn of 3,5 m each.
Fold and attach the first yarn with lark head knot to the wooden dowel
Fold and attach the second yarn with lark head knot next to the first one
Attach the other 2x yarns to the other side
2x yarns have been attached to the left side and other 2x yarns have been attached to the right sight
Make spiral knots with first 2x Rope Yarn
Fold the right strand over the centre of two strands then take the left strand and place it over the right strand behind the centre of two strands and up through the loop then fold the tighten as square knot.
But this time you will not continue by starting with the left strand to complete the knot. You will always make the same process by starting from the right strand
This process will give your yarns the spiral style
You should continue starting always from the same side that you started at the beginning
Continue to knot like this on the other side as well.
After making spiral knots enough, join the yarns in the middle part of the wall hanger
To join the yarns, you should tie them by following me
Cut a yarn approx. 80 cm and hold the end of the yarn up.
Make an “U” with the yarn and after it, wrap the yarn enough
Insert the end of this yarn through the space we created and tighten the other yarn enough
Cut the yarn up and cut the other yarns to give a style to our wall hanging