Good day! A while back I introduced you to the new
FPV features of the Insta360 GO HD video camera
and how to use them including the Insta360 GO's five minute recording time
in FPV mode along with its FPV stabilization mode
and its flow state stabilization mode. If you missed that video on how to use
those Insta360 GO FPV features, make sure to check out this video which
I'll link in the video description below. Since then I've tinkered around with the
Insta360 GO and I wanted to share with you some of the new and fun things I've
learned. So today i'm going to show you how you
can turn basically any micro FPV drone into an Insta360 GO FPV drone by using a
simple 3D printed mount to get some new and fun perspectives
during your FPV adventures! I'm going to mount it to my Diamondback
Rattler and capture a third-person view or what Ummagawd has called "3FPV" during my
first person view (FPV) flight and I'll show you videos of
each side by side. Ready to have some fun? Then make sure to
hit that "thumbs up" button below and subscribe to your TMac FPV channel -
your home for your Journey to Better FPV fun,
flights, and racing stuff!
For today's video I'll be using the Insta360 GO mount
designed by minimicro fpv. In fact, he's got two of them - one where you can mount
it vertically (where the camera slides in vertically
this way) and the other one goes on the quadcopter
like this, so the camera slides in horizontally.
Now I found for this particular build that when I mount
the Insta360 GO camera in the vertical position
it produces better video. So I'm going to use the
mount with the Insta360 GO in the vertical position.
I've included both the Thingiverse link to the mounts as well as a link to
minimicro fpv's youtube channel in the video
description below. Let me show you how you can attach this
basically anywhere to your micro FPV quad
which uses a mounting screw. I'm going to mount it in the back
to get that third person view.
Take off one of these mounting screws from my Rattler.
I've already got the screw inserted into the hole.
It's really that simple. Then you take the Insta360 GO
and slide it in
and now we're going to get a third person view while simultaneously
capturing the HD video from a Caddx Tarsier
and we'll show them side by side.
It's fly time!