hey guys welcome to a mini bike store video blog in this video I'm going to
show you how to properly start the Gazelle from Nitro Motors the 49cc
dirt bike so as you know this is a two-stroke 49 cc engine so we need to
first prepare the fuel so you need to get the unleaded fuel and mix it with
two-stroke oil in the ratio 25 to 1 in the box with the bike you get the mixing
bottle it looks like this so I will show you now how to use this bottle and
properly mix the fuel with petrol here is the fuel bottle you get with with the
bike as you can see on one side you have signs 20 to 1 and on one side 25 to 1 so
you need to actually use the side where is 25 to 1 and what you do you have to
fill the petrol up to the line which is 25 to 1 and then on the top you will see
the second line and you need to fill the two-stroke oil up to that second line
you need to be sure that the oil you are using it's a 2 T oil
when you feel oil up to the second line close the bottle and shake it well
and here you have fuel ready you can put that fuel into the tank now when you
have ready fuel you can put the fuel into the tank
next place the key into the ignition and turn the ignition to the right it's ON
now you have to check that the kill switch is on so make sure it's on without
the kill switch the bike won't start so it has to be well placed you can check
the off switch make sure is not stuck inside now open the petrol tab just here
turn it to ON
here is the choke so you need to in this bike you to push the choke down it locks
in the down position and leave it down before you start the bike you need to
make sure it's properly assembled you can check our video how to assemble the
bike so this is very important before the first ride make sure everything is
tight and in assemble properly so the bike now is prepared for the first
start so we have checked the switches we have the ignition on we have the
petrol tap open the choke in the down position and we have filled
properly mixed fuel so we can start the bike place your left hand on the
throttle grip your right knee on the seat and pull the pull start few times
when you pull make sure you twist the throttle grip little bit while you pulling
after the bike starts you need to push the choke forward and the choke
will come back up the choke has to be in this position when you use the bike
when you moved the choke to up position now you can start the bike
again so again put your left hand on the throttle grip you right knee on the seat
to hold the bike and you can start the bike
after you start the bike for the first time you need to adjust the low idle
speed of the engine so I will show you now how to do it
to adjust the engine low idle speed here you find the little screw with the
spring on it when you turn this screw in to the left it will lower the idle speed
and when you turn the screw in to the right it will higher the engine low
idle speed so you need to regulate the screw and make sure the idle speed of
the engine is as low as possible this is very important for your clutch
so after adjusting the low idle speed you can start the bike and leave it
running for a few minutes for engine to break-in you will also need
break-in the engine for around three tanks so don't go on the full
speed for three tanks let the engine break-in properly it will last you for
much longer thanks for watching if you like our channel please subscribe you
can purchase this bike on our website the link is in the description thanks