Welcome to Sage Audio. Today we’re talking about How to Make Bright Vocals. To get the
most from your music, watch the entirety of each chapter for a complete understanding of the topic.
Excite and Amplify
With an exciter, I’m going to create high order harmonics - these will brighten the vocal while
making the fundamental easier to hear. Then, I can shape these harmonics, and the frequency
response in general using an EQ - I’ll need to place this EQ after my exciter routing wise.
What I boost will depend on the vocal,
harmonics, and more, but as you can imagine, I’ll use a shelf on
my highs.
If you have a mix that you need mastered,
send it to us to receive a free mastered sample of it with the link in the description.
High Frequency Reverb
Some reverbs let you isolate the reverb to just the high frequencies - if you have one with an
EQ section, or you want to use a parallel send, isolate the reverb to just this frequency range.
This way you add high frequency content to your vocal, without it sounding harsh.
This can have a creative effect too, if you decide to make the reverb unnaturally long.
Pro Controlled Bright Vocals
When I’m processing a vocal, I typically have a chain that starts with Soothe 2,
then the Weiss De-esser - from there I place whatever processing I want like my saturation,
compression and so on. Then I’ll end the vocal chain with another Weiss de-esser.
Soothe 2 and the first de-esser tame the vocal before adding any additive processing
that would make my highs sound harsh. Then the last de-esser further controls any harshness
added by my processing. Since the Weiss de-esser is really transparent,
this works well for bright vocals without making the effect too noticeable.
If you’re enjoying the video, consider hitting the like button;
it really helps us bring more videos to you
Dip Sibilance, Boost Air
An easy way to make bright vocals is to first attenuate sibilance and then boost
the air or highest frequency range available. The sibilance will be between 4kHz and 10kHz,
while the air band which will be a shelf, can be centered at 12kHz and above.
This way you achieve a bright vocal without amplifying unwanted sibilance.
Quick High Hz. Delay Use a super quick delay on you vocal,
under 200ms, and isolate the reflections to just the high frequency range.
Like the reverb trick we used earlier, this can be blended in with the vocal for a
less noticeable effect, or can be used more aggressively for a creative one.
Be sure to de-ess before doing something like this, otherwise you’ll create a harsh sound.
Only a small percentage of people that watch our videos are subscribed, so if
you’re enjoying the video consider subscribing. It’s free and you can always change your mind.
Mid-Side on Stereo Vocal
If your vocal chain includes processing that has made you vocal stereo,
like a stereo reverb or something similar, insert a Mid-side EQ on the vocal near the end of your
chain. Since the processing added signal to the stereo image, we can amplify the side image.
I’ll use a shelf filter on the side image and boost the highs to create a bright and airy vocal.
This will keep it from getting harsh since the sibilance is mainly located on the mid channel.
Multi-band Dynamics Processing
Using a multi-band dynamics processor I can create dynamic expansion to my highs,
while introducing downward compression to my sibilance
and low-mids. Boosting the highs, and attenuating the low-mids will create a brighter vocal,
while attenuating sibilance will again ensure it doesn’t sound harsh.
We can also use a dynamic EQ for this, so there are some options for how to accomplish this.
If you'd like our custom plugin presets, audio samples, loops, download sheets, a members-only
badge next to your name in comments, and more, consider joining with the link in the description.
90s Pop Vocal Technique
In the 90s, the trick for getting a bright vocal was to use a shelf filter and aggressively
amplify the highs and then run the signal into a de-esser. This would create an aggressive sound
in which the de-esser would be made to work harder on the now amplified sibilance.
Although this won’t work in every instance, if you’re looking for a 90s vocal sound,
try this out and see if it makes your vocal sound closer to that.
Modern Rap Vocal Brightness
From the 2010s to now, the trick for getting a bright vocal was to set up a parallel
auxiliary track, and isolate the highs with an Linear Phase EQ using a high-pass filter.
Then heavily compress with a downward compressor, and blend it in via the channel fader.
This works especially well for rap vocals and is somewhat indicative of more mainstream rap tracks.
If you have a mix that you need mastered, send it to us to receive a free mastered sample of it
with the link in the description. Thank you so much for watching.