ResMed AirFit N10 nasal mask is designed to perform with simplicity
comfort and real visual freedom
we've put together some useful user tips to help you get the most out of it if
the cushion in your AirFit N10 is not fitting well it may not be the best
size for you a standard size cushion comes preassembled with the AirFit N10
while the small size comes fitted with the AirFit N10 For Her mask
there is also wide sizes available all three sizes are stocked by ResMed
dealers and you may find another size fits your nose better if in doubt
consult your medical equipment provider or physician your mask could also be in
correctly fitted with the device on and blowing air pull the mask away from your
face and reposition ensuring that the lower corners of the mask fully enclose
your nose if necessary readjust the upper straps which are the key
adjustments for seal and comfort adjust them evenly at the same time making sure
that the tabs align correctly with the upper straps the mask may also not fit
properly if the cushion is dirty
if it needs cleaning refer to the cleaning section later on in this video
optional Sox leaves are provided to add a further comfort layer if you want to
use the soft sleeves just slide them over the upper arms of the frame
if the mask is leaking around your face it could be that it's not oriented
correctly if it's on the right way the ResMed logo and cushion size is facing
downwards on the bottom of the cushion along the bottom of your nose your
headgear may also not have the correct tension to find out
check that the headgear isn't over tightened or twisted reattach the upper
tabs like this only enough so that the mask feel secure get comfortable
this will help the cushion correctly inflate later once your devices on and
air is flowing to minimize any leaks next undo the fastening tabs on the
lower straps adjust the straps evenly at the same time with minimal tension until
the mask is stable and comfortably in place then reattach the tabs mask week
may also occur if the cushion membrane is creased or folded over try refitting
your mask ensuring that you hold the cushion correctly on your face before
pulling the headgear over your head don't slide the mask down your face
during fitting as this may lead to folding or curling of the cushion and
cause air leakage
always follow cleaning instructions to optimize the performance of your mask
and watch the cushion and frame with tubing daily by rubbing in warm soapy
water using mild soap use a soft bristle brush to thoroughly clean the events in
the swivel after every use and you should hand wash the headgear and soft
sleeves once a week in warm water using mild soap after rinsing well and tap
water allow all components to air dry completely avoiding direct sunlight
replacing your mask and individual parts at recommended intervals is one of the
most important steps you can take to maintain optimum performance it's time
to replace when the masks frame or a headgear is damaged or if the cushion is
cracked grazed or torn in any way
this video is part of a series of 3 for ResMed AirFit N10. The other two cover
fitting and cleaning we hope you find them helpful the AirFit N10 is
designed to deliver effortless performance throughout the night so you
can get the therapy require with simplicity and comfort life starts with
the mask that gives you the sleep you deserve so you can enjoy everyday and
appreciate the simple things in life that are often the most rewarding the
AirFit N10 is part of ResMed`s new AirFit range the right fit for you.