Okay. So I have rubberband. I'm gonna put the rubber band onto the phillips head.
We're going to go slow and steady outward. You have to put nice pressure on this.
Now I'm gonna back it out.
Basically what the rubber band does is it fills the void between the phillips drive and the screw.
Security nuts are made so you can't get anything on it.
No matter what you do, you can't grip it. So we have to create something to grip it.
We're gonna cut the edge there a little bit to flatten it out. Let's see how we do.
So I did one side over here. I'm gonna do the other side now.
As you can see, it's cut so we can get a wrench on it. That only took me about a minute and a half.
I'm gonna stick a vise grip on it and then we're going to turn it.
There it is.
BAM
Spinning: when you go to drill it out, there you go. Another way is take piece of tape...
...and push it on the surface...
...and then start your drilling. Go to the center and start your drilling.
Apply your pressure, and there you go.
So I want to check if it's gonna spin on me here-yep there you go, it's spinning.
Gonna take a piece of duct tape. It will even be better than blue tape if it's
stubborn and it wants to spin out on you and you just can't get enough pressure on it.
Take a piece of duct tape, put that baby on there, find the center...
...and out it goes. Take your duct tape off and the rivet is gone.
So I have to drill the center. I'm going to take my punch and I'm going to punch a hole.
That's my starting point in the center. I'm going to drill a hole in there.
So a bolt extractor bit that drills out for a bolt extractor runs to the left, not to the right.
So it would not be the same as you would normally drill with a regular drill bit.
So you're drilling it out to the left.
I'm gonna take the drill bit out. Now I'm gonna get an extractor...
There you go. That's what it looks like. Again, the threads go to the left not the right.
There we go. That took a lot of pressure to apply to the screw
for that to extract out a sheet metal screw out of wood.
There you go. Subscribe, like, comment. Visit us at AlbanyCountyFasteners.com
for 50,000 skus right off the rack, ready to ship.
We look forward to seeing you in our next video.