if you use a jigsaw to try and cut a straight line guarantee the line won't be straight
okay you need a proper saw ill get a proper saw
he's gonna get a proper saw
I've had this saw for 20 years
it's only had three blades two new handles its lasted well hasn't it? oh my god she doesn't get it
okay
how far this way
that's what i was wondering how much
sawing kitchen worktop for camper van
smooth all that out yeah great we did it showing me how to use a jigsaw bob, ah I need that after lunch
Oh do that was lucky then you just done that
builders daughter did good mate you taught her well did I? is it going all
right yeah yeah as good camper van conversion look how long and straight that is yeah yeah you're
impressed I'm impressed I couldn't have done it that straight would be like a
snakes and it's more controllable when you get to the end and you get nice clean
there you go look at that simple ay so now we finished cutting out all the worktop I'm now
going to be staining them so I've done four layers of this varnish and then I'm going to be doing
one layer of this clear varnish here as well they're both low in VOC's and if you haven't seen
mel's video on low VOC's you should check it out up here now that Rebecca treated this I think
that looks really nice and what she's done she's varnished it flattened it down then re-varnished
it again so it's giving its nice sheen and she's left all these little bits because she wanted it
to look a bit rustic now here's the thing i've realized something i've tried to fit in here
it fits pretty perfect but here's the thing originally i was going to drill some holes in this
sink and screw it up underneath the work surface but now put it in place i've realized there's
actually, a small gap under here if you want to come in a bit closer Rebecca you can see there's a
gap so what I'm going to do I'm going to cut this out the bottom bit underneath I'm going to cut
this out drop the sink in here traditionally into this bit then hopefully that will support the sink
and that little gap will be just enough to hold this sink if i put it under there
in place i don't have to drill into the sink it will literally sandwich the sink could
be sandwiched between the lower and the upper work surface and if it doesn't work i can still
drill holes in it and screw it but i'm going to cut it out drop it in just to see what happens
so I've realized I need to cut this lip off the sink just this lip here so it fits nice and flush
the only power i've got would be power oak i want to use my angle grinder
well finally something the poweroak can't do
it says error 36 i guess the angle grinder's just a little bit too powerful it's a little poweroak
damn so this is the waste pipe for our sink now i just saw rebecca struggling to put this together
she was like forcing it in and i said to a hang about i've got something to make that a lot easier
a little bit of silicon grease and this not silicon seal silicone grease around the o-ring and
it slides in so much easier and rebecca was really trying to force that in so i thought i'd just
share that little tip with you guys a little bit of silicon grease around your o-ring makes things
slide in a little bit simpler now before i put the work surface and screw it down permanently
i'm going to fix the tap into this hole purely because it just makes it that little bit easier
to do it before i put it in place and this is the tap that Rebecca wants in her camper van
look at that so that's our tap fitted let's check that works
now before i fit this in its final place i just need to put a bead of silicon around
the top of the sink so that it'll stop any water getting underneath
this work surface and getting into there
that's what it means to make it all squished down yeah and then we can seal it when work drops
down
so i'm going to screw it up from underneath and it's going to sandwich it
the sink could be sandwiched between the two pieces
there you go look at that
now this filler all i'm going to do is put a bit of silicon around this
but first i'm going to put the pipe on there that fills the water tank and then i'm going
to screw that straight down in there like that and that's our seat done check that out
hang on we're missing one thing
yeah you've done an amazing job now going from previous experience i know that people are going
to be asking me where we got the sink from the sink actually come from ikea out of all places
so i'll just quickly show you what sync you need to buy if you want to replicate this um i'll try
and put a link in the description if i can find it on the ikea website but if not just in case
the sync is a bohelium i think that's what he says and you'll also need the waste pipe which is a um
i'm not even going to try and pronounce that but there you go that's your waste pipe and there's
your sink and the tap and all the other fittings of of amazon so i'll put a link in the description
for where you can get those as well well thanks for watching and i'll see you next time
see he doesn't have the tools on him he's not prepared at all always make
sure you have your tools on you because you waste so much time hunting for your tools
around