Welcome back to the Fuji Guys. My name is Francis. If you're like myself and you
love the SP-2 but kind of always hoped there would be a little larger one that gives
you larger pictures, while the time has come because FUJIFIILM just announced a
brand new SP-3 share printer that uses the SQUARE format film which is
significantly larger than the instax Mini film. So, if you want to know more
about this product, keep on watching...
So, the SP-3, just like the SQ-10 uses a SQUARE format film and just like the
SQ-10 it uses the NP-50 battery; which is located under the printer as you can see
here NP 50 and you can also charge this battery from this port right here.
On the left side of the printer you have the reprint button so you can reprint the
last photo you've taken without going into the app if you sent it from your
X-Series camera or simply if you closed down the app and you know you just want
to reprint it you just have to press this button right there. The unlock
button for the back door of the SP-3 has been also redesigned so it's even harder
to open meaning that you won't accidentally open it and waste your film.
You simply have to press and then push down and then pull back and then
open it up like this and while we have it open we'll just load some film in it.
Take your film careful not to press on it there and then you will put the
bottom in first and then you align the yellow tab with the yellow tab there and
then you just close it. Then it'll remove the dark slide from the film that
was protecting it from the light and then it's gonna be ready. There we go as
you see up there we have the LED light so if I press on the the power button of
the printer we see that LEDs up there you see they're all open so that means
that I have 10 exposures and as you print well the lights will go off and
they'll tell you how many photos you have left in your printer. If you have a
low battery then it will light up in orange right there at the little battery
sign that way you know you have to charge your printer. Right now we're
going to dig into the app for the SP-3 that also works for the SP-2,
but for this video we'll work with the SP-3. So, if you go into your smartphone
and into the instax Share app. The first option you have and we'll go into
order as they're shown on the screen but the first one is actually a real-time
template so what that is is actually you're going to take a photo and then it
will give you information like where you were located the time, temperature and
all that good stuff. So let's just take a photo and try it out I'm gonna use this
I'm gonna do a selfie like that so I have a photo here, use photo, and then I
can either choose to have it at the bottom are at the top of the photo for
this one actually I'm going to leave it at the bottom because I don't want it in
my face so connect and print so it's going to search for the for the the
printer and then it's just printing and it's actually printing really fast
faster than the SP-2 actually. So I'm just gonna put this to the side while it
processes but you can see in the back here so that's good on to the next
feature is actually quite simple it's take a picture so it's really just
taking a picture using your your smartphone camera and then just actually
putting filters if you want or template or so on so I'm just going to take a
picture here and we'll use that one and then I can do various edit on it so
reframe if I want and filters if I want to no filter intelligent filter
black-and-white, sepia. I'm just gonna put it to intelligence filter and I'm gonna
click OK and then I'm going to print it simple as that.
There you go again and this is going to pop up on this side with the fully
processed image. So in the "select from photo" tab is actually same as the SP-2;
before and in the old app so it's really just browsing through your images on
your phone or either on your on your Instagram or Facebook or Flickr account
you can navigate through so if I click onto Instagram it's gonna give me all
the photos from my Instagram feed so I can choose from and if I click on
Facebook the same thing and then it's gonna give me albums as well so I can
actually go through different albums I did on my Facebook account and just go
in and get my photos from there which is actually really cool. So if I go down
let's say to profile pictures I'm gonna take this photos of me and my girlfriend
in on our recent trip to Japan and I can have the actual template of the Facebook
with the location the time and everything or I can just remove it so if
I want to remove it I just click on template and then the template icon and
I can put standard I can put limited as well
but for now since it was on the trip and I did post it actually from from this
location it's a really nice souvenir of that trip so I'm just going to leave the
Facebook template on it. I'm just gonna click OK and do I want to make
adjustments I'm gonna put the intelligent filter on it and ok and then
I'm just going to connect and print
So here we go again photo on this side and put it to the side. Also, while in a
select from Gallery icon or section you can do a couple of different things like
split photos or collage and I'm just going to show you quickly the collage
thing it's really cool you can put multiple images on to your square print.
So you can go from two images up to nine images. I'm gonna do one with four images
so I'm just going into the the select from gallery I'm going to go into my
Facebook because I have a few images that I know I want to print on a single
SQUARE film. So I'm just going to go there onto my Facebook and actually I
could have gone through the Instagram because there into my Instagram so I
click on the photos I want so I start with one click on it and then I go into
template, collage and then I select the template I want to use so for myself I
want to use four squared ones so I click okay and then I can edit, so I'm gonna
add some photos. So the first one is it's actually four times the same and then
I'm gonna add the different ones to it so on the second why click on the plus I
go get my second image I click on the third the plus again I'm gonna get my
third image and the last one it's going to use this one and then I can
reposition them to make sure they're just like I want so this one I want it
like this. This one like that. That one move it here and then finally this one
just gonna move it like that. So from there I can actually add filters onto
every single one of them so for example I could put two in black and white to in
colors. I could put intelligence filter on all of them or I can just leave him
like that but just for the sake of this video I'm just gonna show you so I'm
gonna select that one and I'm gonna make it black and
white and also this one gonna make it black and white. So there you go now I'm
ready to print it so I just hit the connect and print button
and there you go
Same thing in the back. The tag print icon in the app itself is actually
really cool if you're, for example, at a wedding and you have a specific unique
hashtag for the event, well then you can actually just go into this tab if I
click on it it's gonna ask me to enter a hashtag it's just for example it's going
to use Francis B. here and then at some point I did put this hashtag so now you
see I have all these different images that are hashtag and I can just go
through them and then reprint them so these are actually film photos so I'm
gonna select this one this one. Yeah. So it actually fits perfectly with the
SP-3 for the square format so I'm just gonna print this one and actually no
nothing to do on it since it was film I just want to keep the sort of essence of
it so I'm just going to connect and print.
Again, it's actually quite amazing how fast the printer goes compared to the
SP-2. So, once again same thing gonna put it to the side and you can see in the
back the final result. The reprint button is actually really nicer now because you
see photos transitioning from your history photo printed and you can
actually just click on it and then you see the images you've printed with the
SP-3. So you can just go and browse through them and then just select the
note one you printed this is nothing new because it was there on that on the old app.
But, it's just nicer looking now and in the new app. Moving on you have the "share on
social media" icon which is really cool because it gives you the the template of
the instax. So it goes into your history so you have to print it
beforehand but you can actually just go and click on it you choose the aspect
ratio of which you want it to be shared on social media and then you have
1:1, 4:3 so you you choose the one you want you can choose a different
background so you can change the color in the back of the actual Instax
simulated image and you can put images as well which is really cool so I'm just
gonna put a red background because I like red so I click okay and then I just
have to click on share on social network and I choose where I want to share it so
if I want to share on Facebook, Twitter actually I can save it to my photos as
well if I want to personally just go and put it into the the app itself. So I'm
just gonna save it to photos so it's been saved on to my camera roll so I'm
just gonna go and see I go into photos and there you can see my photo I've
simulated instax SQUARE photos to share on social media. Now this last one is
very cool because it gives you a lot of latitude if if you want to add text on
to your image to print it. I'm just going to go into my template and then I
can choose from various different templates that FUJIFIILM has designed and
then I can go and change the text of it. So, let's just use a simple
one that one so I have a picture I have my little preview and I'm going to edit
the text so it by clicking on it I can actually change what it says. I'm just
going to write some text on it here and as you see the text is too big so I can
just go in and adjust the size of it and then I can also change the color so
let's just put sort of a red and I'm gonna put 2017 into orange. Actually,
orange doesn't pop so let's just put it like a green yeah just like this I can
also change the filters on to the the image itself so intelligence filter for
this one click OK and then I can just go and print it.
There you go. Again, photo in the back, fully processed. So, there you have it a
first-look, top-feature of the brand-new FUJIFILM SP-3 SQUARE printer and I hope
this was useful. If you should have any questions please feel free to leave them
in the comment section down below and if you want to know more about FUJIFILM
products please subscribe to our YouTube channel, follow us on Twitter and
Instagram and until the next time, I'm Francis for the Fuji Guys.