Narrator: This is powder coating,
a process where colored powder
is applied electrostatically onto alloy wheels.
It's far more resistant to weather damage
and wear and tear compared to traditional painting.
Hi, I'm Eddie, from The Wheel Specialist.
We specialize in professional wheel repair
and powder coating.
Today, I'm going to talk you through
the step-by-step process we use
to transform wheels using powder coating.
The first thing we do is take the wheel off the car.
The next step is to check the tires are all right.
Once we've removed the tire,
the wheel will be put on a wheel balancer
to check if the wheel is buckled.
If the wheel is straight,
we take it straight to the strip tank.
We dip the wheel in the strip tank,
and it removes the old finish
and takes it down to the bare metal.
The wheels usually stay in the tank
for between two and four hours.
Then afterwards, they're removed
and then power washed off.
Due to the chemicals, the gunk and the paint,
the old paint and the old powder coating
comes off fairly easily when it's power washed.
Once fully cleaned,
the wheels are ready for their repair process.
Then the wheel is taken to the shot blaster.
Once a wheel has been blasted,
we sand out any damage.
It's important to keep the DA flat
when you're working with it,
otherwise you could create steps in the wheel.
When the wheel has been fully prepared,
it gets sent off to the powder coaters.
The wheels are then hung up
and then placed in the oven for 32 minutes for preheat.
While the wheels are preheating,
we check the powder gun
and any paint gun ready for powder coating.
Once ready, the wheels are removed from the oven.
Powder coating works by
applying dry powder electrostatically.
This is done by applying an electrode on the rail
to create a negative charge.
Although, in our system, it's integrated.
The powder coat is applied with a positive charge.
This causes the dry powder
to stick to the surface of the wheel.
Once completed, the wheel is placed back in the oven
for an additional 16 minutes.
While we wait, we prepare the metallic paint,
which is then lightly applied over the powder coat
to produce the finish.
Typically, the wheel goes in the oven three times
and receives two coats of powder
and one coat of wet paint.
Then we apply a powder coat lacquer
to finish the wheel.
This ensures the best possible finish.
Once the wheel is finished,
it's cooled naturally on a rail.
And then the final quality inspection is carried out.
Narrator: On average, powder coating can range
from $400 to $700,
but freshly powder-coated wheels
can maintain their finish for 15 to 20 years.
And for car fanatics looking to preserve their ride,
it's worth the price of admission.