hi everyone Melanie here from Balloon Artworks and for today's easy
balloon animal tutorial we're getting ready for easter i'm going to be showing you
how to make a one balloon bunny rabbit so i'm going to be using
one 260 modelling balloon this is qualatex pale blue and i've got a tail of about four fingers
so twist off a bubble of two to three fingers and then another bubble that is approximately the same
sort of size then fold these two over grasp hold of the knot and nozzle and as you do so
twist those around take hold of that knot and nozzle and pull it through the center
and that's going to pinch twist those two bubbles okay give your balloon a little bit
of a squeeze and we want to make some bunny ears so i'm making them about a hand spam
so perhaps four inches and then we want to make another bubble
to match this one and if you're enjoying this tutorial be sure to pop the like button and do
check out my series i've got several series of easy balloon animals to make if you're fairly
new to balloon twisting you'll probably enjoy my critters series most of all and i'll leave links
in the description below they're all available on vimeo so twist these two ears together just
like so and then take your balloon and position it below those pinch twists make a bubble of about
three fingers two and a half to three fingers okay make another bubble of a couple of fingers
so we're going to pinch twist this bubble so bend the balloon over grasp hold of that bubble which
should be a little bit soft pull it upwards and as we do so twist it around okay give your balloon a
little squeeze make another bubble of a couple of fingers we're going to pinch twist this as well so
again fold your balloon over pull that bubble upwards and as you do so twist it around okay
and then position the long balloon so it's coming through the bottom of those two bubbles okay
so that's what you've got so far next make a bubble that is about four inches long
and twist off another bubble
okay and then we're going to make another bubble to match this one
followed by another bubble to match this one okay so another two finger bubble
okay and then fold your balloon over and make another bubble that is very close in size to
this one just twist that off and then we can just twist those two large bubbles together okay and
that's what we've got at the moment we can just give this a little bit of a squeeze and a stretch
and then with the rest of this balloon just pull it through the center of the rabbit's body
and then we can just adjust everything
so that's what you've got at the moment take the tip of a pink 260 and just put a little bit of
air in and i really do just want a very very small bubble so i'm just letting the air out
and then as i do so i'm twisting putting a twist there just to trap the air and then
i'm just going to tie that off okay we can just pull that into the cheeks there and wrap around
and then with the black sharpie i'm just going to draw some small eyes
so there's your easy balloon rabbit perfect for easter gigs i'll see you again in the next video