Hi everyone, Welcome back to geardo,
Today we will show you how to replace the front and back cameras
on the Samsung Galaxy s20 mobile phone. To start, we need to have the right tools
to proceed with the repair, which You can find in the description.
First, Take out the Sim tray and then the back cover removal.
To remove the back cover, it needs to heat gently
around the back cover edges until the pasted adhesive becomes soft.
For this, we are using a heating pad. Place the back cover side on the heating
pad and Select the mobile phone HEATING option and leave it till it completes.
Alternatively, you can use a heat gun or hairdryer.
Once the heating has completed,
Use a suction cup to create an opening between the frame and rear cover. Next,
insert a plastic card pry tool or something similar to cut the adhesive around the back cover.
Next, take out the back cover. Next, undo five screws and disconnect the connector
to take out the wireless pad. ANd also disconnect the battery plug.
Next, take out the logic board frame by undoing five screws.
Next, disconnect and take out the front camera from the logic board. If you have a
broken front camera, replace the front camera with a new unit and start closing the device.
Next, take out the logic board ,first, undo six connector plugs attached to the logic board.
And then gently lift the board using a pry tool or tweezer.
Next, disconnect two in one wide camera and
telephone camera plugs from the rear side of the logic board.
Next, replace the broken telephone or two in
one wide camera module with a new unit and secure it on the board.
Next, place the logic board on the body. And then fasten six connector plugs into the board.
Next, place the front camera in the body.
Next, Secure the logic board frame by adding five screws,
Next, add the sim tray, secure the battery plug,
and place the wireless pad by securing five screws and the connector.
Next, Before installing the main back cover, make sure it has enough glue on it.
If not, use B7000 glue or a new double-sided back cover adhesive.
Finally, we are using screen binding clips to tighten the back cover to the body.
If not, you can use rubber bands and leave them for some time.
I hope you have enjoyed the camera replacement guide.
Let us know if you have any questions; please share and comment on our videos.
Do not forget to hit the subscribe button.