These are the steps for the Origami Butterfly.
For the Origami Butterfly we're going to take one sheet of paper, start with the colored
side up and we're going to take the bottom edge going to fold it up to the top edge,
this is called a Book Fold.
Now go ahead and make sure that their nice and lined up so there's no extra color showing.
Nice and precise, crease it down.
Go to the left, go to the right, and then open it up and do the same thing on the other
side.
So this is going to be both of the Book Folds.
Then open it up flip it over and now we're going to do diagonal folds.
This is going to be with the white side up and we fold these diagonal creases and, again
make sure they are nice and precise.
Lock it in by sliding your finger down and then using your thumb to hold it in place
and then go off to the side on either side.
Open it back up and then we're going to do the other diagonal fold so both diagonal folds.
Now go ahead and leave that last diagonal fold there.
We're going to pick up the paper, and right below these crease lines right here I'm going
to put my fingers, my thumb and pointer finger.
I'm going to put them both right there, I'm going to pinch the paper and then rotate the
paper up where all four fingers come in to touch each other.
When that happens I am going to squash the paper down and that's going to create the
base that I'm going to use.
This is called a water bomb base in Origami.
Make sure that you have two flaps on either side.
So two on one side, two on the other side, just like that.
Next I'm going to fold one flap at the bottom, the bottom corner.
I'm going to fold it up not all the way up to the point though, just a little bit off,
about that far off.
Not both flaps, just one flap.
On the other side I'm going to take one flap here too and fold it up about the same distance
apart, just like that.
Next, flip the whole thing over and I'm going to take the bottom point of the paper.
I'm going to take that bottom point and I'm going to fold it up.
You see how there's that spot where it doesn't want to go any farther?
I want to go a little bit past that point.
So I'm going to pick it up, and what's going to happen when I go up a little bit past that
you see how the bottom points start coming up with the paper.
That's alright, as we work our way over you can sort of get, this is called a gusset,
this little extra piece of paper right there.
It's going to develop like that you stretch it apart you can flatten that down.
So, as we work our way over and sort of stretch it apart and flatten that little triangular
gusset down, just like that.
That's all the wings on both sides of the butterfly.
Go ahead and flip it over.
I'm going to fold that whole triangle , that whole large triangle.
Fold the whole thing down , and then go ahead and bring it up again but not as far as you
folded it down.
That's a Pleat Fold, where we fold it down and then back up, just like that.
Next we're going to fold the whole thing in half.
Take this whole side and bring the whole thing over to this side.
There's a lot of paper in there so you might have to push a little harder than your used
to but that's Okay.
Next, this is the last step.
I'm going to pinch right here, this is the head of the butterfly.
I'm going to pinch right here, I'm going to fold the wing over and what I want to do,
the line I want to make is going to go from the edge of the head down to this point right
here.
So, that's the crease I want to make all the way over.
The same thing on the other side.
The two should match up and if you flip it over and look at it.
That right there.
That is the finished Origami Butterfly.