Hello everybody
today we perform the TP-LINK TL-WR840N wifi router setup
First use a LAN cable connected between the computer and wifi TP-LINK via 1 of 4 LAN ports
The installation steps are as follows
Open a web browser
Enter the ip address of TP-LINK wifi router
192.168.0.1
Enter
If you cannot login using ip 192.168.0.1 address, you can log in with http://tplinkwifi.net
http://tplinkwifi.net
Both username and password are admin
admin
Log In
Logged in successfully
Select the setting mode for TP-LINK router
Operation Mode
TP-LINK router has 3 mode settings
We usually set it to "Wireless Router" mode.
If any changes, click "Save"
The next step is to install the Internet
Network >> WAN
There are 5 ways to install the Internet
Usually we choose Dynamic IP
Connection Type: Dynamic IP
Click "Save" to save the settings
Next is to wireless settings
Wireless >> Basic Settings
set wifi network name in "Wireless Network Name"
for example TP-Link_NETVN
Save
wait a minute
Next is the wifi password setting
Wireless >> Wireless Security
WPA / WPA2-Personal
setup password in the "Wireless Password" box
for example 12345678
12345678
Save
wait a minute
Use a LAN network cable to connect the WAN port to the Internet modem
as above model
WAN port
After you've finished connecting the network, try connecting to wifi
TP-Link_NETVN
Connect
Enter the correct password
Click the eye icon to review the password
next
Connected
success
Status
We review the parameters installed here
Thank you for watching
if so good,Don't forget to Like and Subscribe
If you have any comments to help make the video better, please comment below the video