Have you ever scribbled something
down with a black pen on a piece of paper, then
accidentally smudged the paper with water?
What do you remember seeing?
Well, what happens is that you might see the black ink
start to smudge and start to see some colors that
aren't black at all, maybe some dark blues and some darker
purples.
But why is this?
This is because black dye is actually made out
of a bunch of different other dyes and different components.
And what you've just witnessed is a basic example
of paper chromatography.
Chromatography involves taking some kind of mixture
and using either solid or liquid to separate it out
into its different parts.
There are many different kinds of chromatography,
but they all rely on having a mobile phase
and a stationary phase.
Let's go over how paper chromatography
works, since this is the simplest kind.
In paper chromatography, the stationary phase is the paper.
So here's your piece of paper.
You can draw a little line at the bottom
and draw a spot for where you're putting
on your dot of your sample.
Next, you'll want to prep a beaker,
or actually, any kind of container will do.
But in this, you'll be putting in your mobile phase.
And your mobile phase can be some kind of solvent.
It could be water, or it could be
any organic solvent you want.
Now that you have this, you pour a small amount of solvent.
Again, not too much, because you don't want this to already
be above the level of your spot, or else it will just all bleed.
And now when you put in your paper
into this container, what you'll get
is something that looks like this,
with the spot being around here.
And what you'll observe over time
is that through capillary action,
this pink solvent will travel up the piece of paper.
And as it does that, it'll actually take some of the dyes
from that green spot with it.
And let's see what happens at a few different time points.
At the first time point, you might
see that it separated into two spots.
This implies that it's composed of two different components.
However, if this were a very complex mixture,
you could even see five, six, or a lot of other spots.
If you wait even longer, this is what you'll see next.
You'll see that the spots will continue traveling even farther
up the plate, and the separation between them,
that distance will increase even more.
So ultimately what you've shown here
is that whatever was in the green spot originally
wasn't just one compound.
It was two compounds.
And why do they separate in this manner?
Well, the blue spot traveled farther.
That means that it was pretty attracted to that pink solvent
that was traveling along.
Whereas the yellow spot didn't move quite as much,
which means it was more attracted
to the paper for the stationary phase.
This competition between the stationary phase
and the mobile phase pulling at the components
is what drives the separation that
occurs in all different kinds of chromatography.
So let's try to lay this information out in a table.
We've talked about how for paper chromatography,
the stationary phase is a solid; the mobile phase
is some kind of solvent, so a liquid;
and they're separating it based on polarity,
meaning how attracted it is to the paper versus the solvent,
depending on its chemical properties.
The next kind of chromatography that's
almost identical to paper chromatography
is known as thin-layer chromatography,
or TLC for short.
We'll see that all the spots on this table
are pretty much the same.
The main difference is that instead
of having a piece of paper, you have a glass slide that
is coated with a layer of silica gel.
This is a great preparative tool that is commonly
used in the organic chemistry lab.
To remind you that these two are related, what I've drawn here
is a little beaker with a small either plate or piece
of paper inside.
And the arrow shows that the solvent is traveling up
the plate through capillary action.
The next kinds of chromatography we'll be going over
are column chromatography.
And in this case, you have a column
that I've drawn right here on the left.
And you fill it with some kind of packing material
and dump in some solvent as well.
You can lower your sample that you want to separate out,
and what you'll find is that as you
keep dumping in more solvent, this
can separate into bands that represent different compounds,
and they will travel down the column.
So in basic column chromatography,
you're usually using something like silica gel
as your stationary phase.
Your mobile phase is typically an organic solvent,
and again, you're separating based on polarity.
In size-exchange chromatography, your stationary phase
is composed of beads.
However, these little beads actually
have some holes in the middle.
And because of that, with size-exchange chromatography
these beads completely fill the column,
and tiny compounds can get through that center
of the hole, like so.
But really big compounds kind of have
to go around and go between the beads.
So what happens here is that really small compounds
travel pretty far, pretty fast, whereas large compounds take
a longer time to come out the bottom.
In ion-exchange chromatography, the beads
that are filling this column have some kind of group on them
that is charged.
Compounds that have the same charge
will be repelled by the column, meaning
they'll travel pretty quickly.
But compounds that have an opposite charge
will bind tightly to the column and will
be more reluctant to come out since they are so
attracted to the stationary phase.
Affinity chromatography is also pretty similar,
but this usually relies upon very specific interactions,
such as between an enzyme and a substrate,
and really relies on this binding affinity.
Things that will bind tightly to the enzyme
will probably just be primarily the substrate,
and everything else will just get washed right
off the column.
Later on, what you can do is wash out
the compound of interest that was previously bound
to the column, using something that that molecule is
even more attracted to.
With HPLC, HPLC stands for high-performance liquid
chromatography, formerly known as
high-pressure liquid chromatography.
This is essentially the same as the basic column chromatography
that you see there in yellow.
However, with HPLC, it's a more advanced technique
in that you're working with very, very small quantities,
and the detector in the machine is much more sensitive.
The last kind of chromatography is gas chromatography.
Now, this looks pretty different compared to the others.
And in this case, your stationary phase
is a liquid, while your mobile phase
is some kind of carrier gas that's passing over the liquid.
So what happens is, you inject your sample,
and it travels in a coil tube into that box
known as the gas chromatograph.
That's a fancy name for the equipment
used to run gas chromatography.
Inside the chromatograph is a heated chamber
through which an inert gas flows.
Here, the sample vaporizes and enters the gas flow
onto the column.
The things that are the most volatile,
meaning have a lower boiling point,
are able to travel faster, whereas things with a higher
boiling point take longer to come out.
And so this is a separation method
that's great when you have differences in boiling point.
So we've gone over all these different kinds
of chromatography, but you could certainly
go into each of these in much more detail.