Freight transportation is an absolutely essential part of modern life.
Maintaining the complex supply chains of raw materials to finished goods requires a seemingly
endless amount of hustle and bustle.
Millions of tons of freight are moved each day, mainly on trucks and trains.
But, “shipping” got its name for a reason, and we still use ships to move a lot of our
stuff.
One of the main reasons is that it’s efficient.
In fact, moving a ton of goods the same distance on a boat takes roughly half the amount of
energy than it would by train and roughly a fifth of the energy it would take on a truck.
You can prove this to yourself pretty easily.
Even heavy stuff is practically effortless to move around once it’s floating on water.
Of course, shipping by waterway also has its limitations.
It’s slow (for one) and not every place that needs goods is accessible by boat.
We’ve overcome this obstacle somewhat through the use of constructed waterways, or canals.
Canals and shipping are described in the earliest works of written history.
But there’s another limitation more difficult to surmount.
Water is self-leveling.
Unlike roads or rail, you can’t lay water up on a slope to get up or down a hill.
Luckily, we have a solution to this problem.
It may seem simple at first glance, but there is a lot of fascinating complexity to getting
boats up and down within a river or canal.
Hey I’m Grady and this is Practical Engineering.
On today’s episode, we’re talking about locks for navigation.
The efficiency of water transportation has a surprising amount to do with how the world
looks today.
Nearly every major city across the globe is located on a waterway accessible by shipping
traffic.
Waterway transportation is weaved into the history of just about everything.
So, it’s no surprise that, even since thousands of years ago, humans have sought to bring
access by boat to areas otherwise inaccessible.
But, creating waterways navigable by boats isn’t as simple as digging a ditch.
Unlike the open sea, the endless and uncluttered surface of water, land has obstructions and
obstacles.
The topography dips and rises, rivers and ponds get in the way, and manmade infrastructure
like cities, roads, and utilities impede otherwise unhindered paths from point A to point B.
The quintessential example of this is the Panama Canal: the famous cut through that
narrow Isthmus saving ships the lengthy and dangerous trip around Cape Horn.
At scale, this seems pretty straightforward - just cut a ditch from the Atlantic to the
Pacific.
But the details of what is one of the largest civil engineering projects of the modern world
are more complex.
One of the most important of those details is that the majority of the Panama Canal isn’t
at sea level, but actually 26 meters or 85 feet higher.
This is due to sheer practicality.
Construction of the Canal was already one of the largest excavation projects in history.
Keeping boats at sea level would require cutting, at a minimum, an 85-foot-deep canyon through
the peninsula involving millions and millions of tons of extra earthwork that would be completely
infeasible.
So, rather than cutting the channel deeper, we instead raise the boats up from sea level
on one side and lower them back down on the other.
And we do this using locks, an ingenious and ancient technology that has made possible
navigation on canals and waterways that otherwise could never have existed.
The way a lock works is dead simple.
And of course I have a little demonstration here to make this more intuitive.
For a boat going up, it first enters the empty lock.
The lower gate is closed.
Then water from above is allowed to fill the lock.
This is usually done through a smaller gate or a dedicated plumbing system, but I’m
just cracking the upper gate open.
Once the level in the lock reaches the correct height, the upper gate can be fully opened,
and the boat can continue on its way.
Going down follows the same steps in reverse.
The boat enters the full lock.
The upper gate is closed, and the water in the lock is allowed to drain.
Again, I’m just cracking the gate in the demo, but this is often done through a slightly
more sophisticated way in the real world.
Once the lock is drained, the lower gate can be fully opened, and the boat can continue
on.
I hope you see the genius of this system.
It’s a completely reversible lift system that, in its simplest form, requires no external
source of power to work… except for the water itself.
One thing to notice about a lock is that even though boats can move through in both directions,
water only moves through in one . The lock always fills from the upper canal and always
drains to the lower canal.
This is because… gravity.
Hopefully that’s obvious.
But, it’s important to realize that even though we’re not using pumps, the energy
required to raise and lower boats through a lock isn’t necessarily “free”.
Each time the lock is operated, you lose a “lockful” of water downstream.
And sometimes that matters.
Canals aren’t full of limitless water, and if there is a lot of traffic or the locks
are particularly large, this could mean losing millions of liters of water per day.
On large rivers, it’s usually not enough to worry about, but in some cases this could
cause a canal or reservoir to go completely dry.
So, canals that use locks need some way to replenish the lost water or at least limit
how much water is lost each cycle.
What if there was a way to save the water used to fill the lock and reuse it?
On the Panama Canal, the locks use water from Gatun Lake, a critical source of drinking
water for the country.
During periods of drought, water supply becomes a serious issue.
That’s why, when the canal was expanded in 2016, the new locks included water saving
basins.
Like the locks themselves, these basins are an extremely simple and yet an ingenious way
to limit the amount of water lost each time the locks are filled.
Let me show you how this works.
On my demo, instead of draining the lock into the downstream canal, I can drain it partially
into a nearby reservoir.
Then, when the time comes to fill the lock, I can recycle the water from the basin, also
called a side pond, to partially raise the level.
Of course, I still need to use water from the upper canal to fully fill the lock, but
it’s still less water than I would have otherwise used.
In fact, if the water saving basin is the same area as the lock, you can save exactly
one third of the water.
The reason, again, is gravity.
Water doesn’t flow uphill - it has to always be going down.
To save water, you need a volume within the lock for it to come from, a lower volume for
it to drain to and wait in the side pond, and finally an even lower volume for the saved
water to go within the lock.
That means the best you can do with a single basin is to save a third of the water that
would otherwise be lost.
But, it’s possible to do better than this.
One option is to have the water saving basin have a larger area.
Imagine an infinitely large basin such that no matter how much water drains into it, its
level never rises.
In this case, you could drain the upper half of the volume of the lock into the side pond,
and then use that water to fill the lower half of the lock on the way up.
So, the area of the basin is important, with a larger area providing a greater water-saving
benefit.
The other way we can do better is to have more basins.
Notice on the diagram that the bottom two volume divisions are lost each cycle.
When the lock drains, each volume division moves from the lock to the side pond one division
below, except for the bottom two divisions which are lost downstream.
That water can’t be stored in a side pond because the pond would have to be at or below
the bottom of the lock.
And when the lock is filled, each side pond fills the volume of the lock again one division
lower.
The top two divisions can’t be filled from a side pond, so they are filled from the upper
canal.
It’s pretty easy to see why more basins equals smaller divisions and why that equals
less water lost for each cycle.
Of course, for both the number of ponds and their area, there are practical limitations
to how much land is available and the expense of all that plumbing, etc.
So, you have to balance the value of saving the water in the locks versus the capital
and ongoing expenses of constructing and operating these basins.
That’s made a lot easier with a pretty simple formula to calculate the ratio of how much
water is used with side ponds versus without them.
The new locks at the Panama Canal each use three basins which are about the same area
as the locks themselves.
Plugging in 3 for the number of basins, and 1 for the lock to basin area ratio, you can
see that the new locks use only 40% of the water that would be required to operate without
the basins.
That’s pretty impressive and definitely seems worth the cost of the basins.
But, it’s not the only example of this.
Another lock in Hannover Germany has ten basins, reducing the lost water by about three-fourths,
although the tanks are underground so they’re harder to see.
I’ve been talking about freight transportation in this video, but people use boats for all
kinds of different reasons, and in the same way, there are all kinds, shapes, sizes, and
ages of locks across the world.
In fact there are a lot of canals where you can operate the lock yourself.
They’re also not the only way of moving boats up or down, but that’s a topic for
another video.
Next time you see a lock, consider where that water comes from, and keep an eye out for
side ponds that help save a little or a lot of it for the next time.
Hey, very quickly, I want to say that this video was supported by viewers like you through
Patreon.
YouTube is not a full time gig for me and there are quite a few costs that go into the
videos from materials, digital assets, equipment, and help from professionals.
Sponsors and ad revenue come and go, but the supporters on patreon are the ones truly making
it possible to put out a video like this once per month in my spare time.
If you liked this video, I hope I earned your subscription.
You can also keep up with everything I’m doing in my monthly newsletter linked below.
As always, thanks so much for watching, and let me know what you think!