in this video we are going to look into how to do
the twisting and also interlock earring model
are you ready let's get started!
before we start model let's take a look on the structure
i'm going to delete some of them so for you to see the form better. we
have the pipe structure inside and we also have a twisted structure
outside with this structure you can also see
it is a little bit deformed in the way. so when you have two of them together
it's showing it's more like interlocking together.
so as long as we can figure out that one part we should able to do the rest
we are going to starting from the scratch. let's draw
ellipse from the top view. it can be any size that you want. i
pretty much want to have a size around like this size.
and this is a degree two curve, we are going to
rebuild into the degree three, so we can have
like two direction we can stay with the same
count for the point but degree we want to change
to three once we have changed that, i'm going to pick up this point and this
point. let's do a test. we want this point going
up like this, and if we rotate this guy 90 degree, and making a copy. let me turn
this into the red color. it's easier for you to see. you can see
they're kind of going up and down and not touching each
other there. so that does make it easier to see.
let's just simply just pipe them so you're going to get some sort of a
structure like this. and you can adjust it later on if you
want to. this is pretty much what we wanted to have is kind of
locking each other once we have that we are going to do our
design on the side. let's figure out how long is this guy
by using the command length. it shows 33.396 mm
I'm just gonna make a copy and let's draw a straight line here with
exactly the same length holding the shift then that will
represent this curve. when it is straighten flat. we want to do
our design over here i'm going to use the conic corners, and make sure
snapping with the center, snapping over here.
and coming into the right view to decide how big you want this guy.
i do not want it to be like dramatically giant
so somewhere around here will be fine. once i have that, i'm gonna use the
sweep one and choose the rail cross section
and i will get this over here. we're gonna use the twist command under the
transform then you got the twist over here, we're gonna select this
one starting from the end point over here,
to the end point on the other side. make sure the infinitive is
equal yes, and we want to go from here. one, two, three depends on how many time
you would like to twist. then we'll get this shape over here. the
second shape that i wanted to do is similar size. so let's draw
a circle and roughly about this size. so let me move this on
the side. it's not bothering us. so we are going
to use the surface sweep one rail. pick the rail and
pick your cross section. then you will get this
pipe looking things. let's go ahead to cap
both of them to be the solid. and we want to moving one back next to
each other. okay so let's do a test to see how it
goes. we're gonna come in here to use the
command flow along curve. we're gonna flow
both of the object the base curve is here and remember to record the
history. and we want to click on the target curve.
all right if you feel like this is too much increasing the size too much
since we record the history we can moving
this base curve more close to the center. and they will come in a little bit more
if you want more make sure you're moving in a little bit
one thing you want to be pay attention is you do not want this to be deformed
too much. so i like it to keep it somewhere in the
center over there because i'm going to set the stone.
in the middle double check if you like the result. if you do.
let's go ahead to rotate in 90 degree holding the shift and hit on the alt key
so you will get the duplication over there. so this will
be our twisting interlock.
earring structure. i have other videos talk about the stone setting also have a
course to show you all different kind of stone setting
in the 3d model. how to build them correctly if you're interesting on the
right top corner over here. you will see the link and in the
description below. there are a lot more videos for the
member only at the membership program. Don't forget to sign up with a small
monthly fee. not only you're helping my channel
you're also helping others to learn rhino. thank you for watching
i will see you next