What you got going on over here, just making an AC Burrito.
We took the AC off the old one.
Now I get the new one on. This is our genius plan.
Yeah. Can't you tell what we're We can't manhandle this one.
Like we did the last one. Nope. So we're wrap the rest of the car.
Hopefully, we'll keep it clean and being free.
That was step one now for Step 2.
Yeah.
I feel like this always ends up being so uneventful for you guys,
but our hearts are pounding and I'm sweating over here.
Good morning adventures and welcome to fixing your
mistakes with the Bieller's AKA fixing your cabinets.
You guys are last video. We made a lot of mistakes.
One of, which was cutting these cabinet doors in correctly.
So that was a gigantic Gap in the middle. We hypothesized All
kinds of different ways to salvage those cut
because this stuff is expensive,
Lumber so expensive, right now, you guys but we couldn't Salvage it.
So we re cut them and we got it right this time. I think we did it,
we measured 50,000 times cut way too big at first and then came back and made it smaller.
So, What am I doing?
All right, installed. But will it close?
Let's find out. There is no big one inch Gap,
I guess you could say, we really screwed it up
one more project done while Alison was working on the all these cabinet doors.
I've just been staining and varnishing. This nice little piece of Cedar here.
This not only covers the nasty plywood and everything that our bed is made out of.
But it's also going to keep our mattress and It's not up here,
looks great. Yeah, I love all these finishing touches it's coming together.
Our cabinets are officially installed.
You guys - that one. Tell them why that one's not installed.
We need to put the hinges up here and I just did normal spacing See,
so our second hinge. Little box.
Yeah and it hangs over ever
so slightly. So I'm trying to decide if it's worth it to cut a new
one which we don't have any more scrap.
So we'd have to buy a new whole piece.
Or if I'm just going to try to make a little insert in here
for the for the hinge to just kind of sit in TBD.
So close one, way or another. We are gonna figure it out.
Yes. Also maybe you'll notice the shot is wide again.
I got my lens back. You guys. Does it look like a less Confined space.
We're finally putting the finishing touches on this overhead cab.
If you guys remember, we actually installed this awesome would feature on this side.
These are actually just a little cut down Cedar rectangles,
but we never saw them on this side. Why is that?
Well, because this is not a very fun job to do.
You gotta sit like this the whole time, you've got to attempt to get these in a straight line,
which is very difficult, considering how out of square. All this stuff is and it just takes forever,
but I'm getting it done today. My big idea to get these square is to just
try Trust where we place this ceiling plank.
So I'm just going to make a nice little guideline, okay,
got my guideline. Now all I have to do is one by one glue.
These suckers up with the help of liquid nails.
We did it. You guys, it's complete.
Our little bedroom up here is coming along this one a lot smoother than the other one.
Mainly because we knew a bunch of out what not to do.
So we just place them one by one
and tried our best. To keep them straight and they somehow turned out looking pretty straight.
So, all right, job done. Yeah.
And just like that, the gaping hole has been closed up.
We have an AC, you guys my gosh.
I know more hole, yay,
yay. Where'd you come from? I don't know.
The depths he brought the high noon. Hi,
new delivery. Which are you doing, man? Come on, as is tradition,
y'all. More projects get in done.
Nothing to this video is just getting shit done,
and that was surprisingly,
kind of easy to install. Yes,
we don't have a quite wired up yet,
but we'll turn it on one of these days. Hopefully, it actually works.
That would be a real bummer. It doesn't look fine.
But that is it for today. Y'all,
we are doing a movie and Ramey night. We've been on an 80s movie Jam.
So we have our really good one in store for tonight.
We'll see you there.
Oh my gosh. Check it out.
Dinner is ready. So it looks amazing.
These look so as we're gonna airfryer wings,
but our local grocery store didn't have wings.
So now we have a whole, frickin chicken legs,
got air, fryer. I know about to get one.
It's all like crispy on the outside.
Oh, did you hear that? Yeah. Oh my gosh.
Okay, I am so excited for this. And we have our movie.
All cued up. I just To change into something a little more comfortable.
Tada. These are some pajamas are actually from Tommy John and they are sponsoring today's video.
They make super lightweight. Silky smooth loungewear that is made to adapt to an actual moving body.
Oh, yeah. It's definitely. Yoga proof.
Even if you're not that good at yoga, these really are my favorite pair of lounge pants.
I've ever had my previous ones,
ripped completely, and the ones that replace those At all,
pilled up. So they look stupid
but these ones can take anything that I throw at him and I can throw a lot of them.
I don't know what that means
but he can't you don't want to know plus they make your booty look great.
So you can go from from B to fabulous.
That's super sexy. I tried,
I gave him my best. They also have underwear and I gotta say they are extremely comfortable.
I'm wearing them right now. In fact, should I do a little demo?
I'm doing it. Seriously though,
we want to give a huge. Thank you to Tommy John for supporting the RV renovation.
That's almost finished. We're almost there you guys get in there.
They hooked us up with a discount code just for you guys.
Click, the handy little link that's in the description right now and use the code endless Adventure.
Should be easy to. Remember, it's the name of the chain.
If you use that code, you're gonna get 20% off.
Plus free shipping. All right, let the jammie and movie night commence,
it's time. You guys, we told you guys, we've been watching a bunch of 80s movies.
It's what I've never seen before. You've never seen. Never seen him.
What a treat. I know. It's killer clowns from outer space and you'll never guess what it's about.
Not about killing contractors know, that's exactly what it's about.
And I'm locked and loaded and ready.
This is over, I don't know. Are you ready for killer clowns from outer space?
I'm not ready. This was my idea. Yeah,
I'm subjecting into it. Well after report back in a bit and see what you think.
Yes.
What do y'all think about killer clowns from outer space so far?
Well, it's way more wild than I ever thought it was going to be any more wine.
It's pretty good though, right? It's good. Yes,
it's good in a very weird way. Look at this horrible,
horrible mess. We've made you guys getting all the tiles yesterday for the overhead cab this Cedar,
man. It makes quite quite a disaster Zone.
Also, we think we're going to keep everything clean as we go,
but then we end up just doing this and then it gets late and then we're like future,
Eric and Allison can handle that and that's us.
That's us right now. We're doing it. All right, I guess we'll get this all cleaned up
and then I think that we are going to focus on the kitchen.
We built our one drawer We got are you gonna build everything else?
We got some momentum going so we'll just so far,
we get
First up we're going to make a little slide out drawer that's
going to basically be like a little spice rack.
So we're trying to keep this super simple. Imagine this is the front.
Then we have the back that goes inside of the counter and then this is basically the bottom.
So this whole side of it is open and the idea is that you slide it out this way.
So you pull it out like that and it reveals this inside part,
we're going to have some kind of Rack or some magnetized system or something.
We're kind of trying to figure that
out. But we're going to build this first and then see how we feel.
Whoa, through our number two installed,
we're not 100% sure what we're gonna
do. But our current idea is to get like a magnetic strip to put on here
and then we can return decide if we want to just like door knives in here
or likely will do seasoning.
Cars that will have magnetic lids and they'll just kind of sit against here and then they won't be,
you know, rocking around in there because they'll be magnetized on here.
So don't have to worry about them falling or breaking or anything like that.
I'm just a nice and neat and they're covered.
All right to drawers down. We've got one more there for the trash can.
Then we've got some doors for that and then, you know,
is what we're going to do for that. I don't know.
So we ended up calling it a day
but we did complete our trash bin cabinet guy but now that it's done,
I think we're going to redo it. It's it's unfortunately,
pretty heavy and we kind of goofed up the interior.
So the trash can that we are likely getting won't fit in here anymore.
Some of the set this aside and yeah, figure something a little learning experience,
tell me about this so you guys we're doing wall.
All paper. I know some of you are probably screaming right now at us.
No, don't do it. We're doing it. It's Quadra style.
I think is the name of this stuff. Yeah.
But they make all sorts of tile looking wallpaper patterns.
So we're going to try this in the kitchen. Neither of us have ever
tried to do wallpaper before in our lives,
so hopefully it's not too hard.
First panel is done and it went much better than we anticipated.
I think we got it really straight.
And it's looking really beautiful
but we forgot that we only ordered enough
as a sample because we weren't sure if we were actually going to like this.
So sadly this kind of is as far as we can go.
We have like one more sheet, we can put up what we were hoping to do the whole kitchen area.
Today we're going to do this area eventually to but now that we know we like it,
we're gonna go with it. Yes. We're just gonna order a bunch more and now it'll be fine.
You also might notice that we painted our face frame down here.
You guys now we just have to build all of our cabinet fronts which might be I think
what we're going to do.
Do next, let's do it.
I've created a monster. Thank my little friend here.
We clamp the hell out of this thing.
Check that out. Every clamp in existence,
at least in this garage. Looks like a medieval torture device.
Does it look like a cabinet door actually?
That's what it is. And just like that.
That our doors are done. Oh my God.
Doors doors and all kinds of things.
You guys, they turned out so good. Check this out.
You guys are actually super sturdy, they're like,
shaker-style cabinets, which look basically look like this,
but they're a lot more complicated than this. You have to build these little
slots and cut a lot of different pieces and you really just have to know a lot.
You don't know a lot. So we cut them all down to size.
Then we cut all these strips here,
glued those strips on use a bunch of crazy clamps.
Like you saw earlier to hold that all together
since this was plywood the The edges were really ugly.
You could see all the Plies in there.
So we got this amazing Birch edging that you glue
on and then sand down and it essentially becomes seamless with your cabinets.
Yeah, y'all. It is a game changer. Having this stuff.
I'm really proud of these here until I'm almost had to paint them.
But alas, I must be so.
We've got our drawer front here and we're just trying to figure out how to line it up properly,
so that everything looks really even. We've never done this before.
So feel free to let us know if there's a much easier way to do this.
Well, yeah, we already painted it, so we can't really make marks.
So we thought we're gonna put tape, we're measuring out a half inch from each side
because that's how much our drawers overhang.
So we're just going to line up the corners here
and hope that that gives us a really nice even drawer front.
It's gonna work. That's give me fine. That's not talk about.
Check this out. That's nice.
That is soft clothes. And baby. Yeah,
we're still trying to figure out the drawer handles that we're going to put on here,
but for now, we'll have to open it like this.
Y'all look at this. I'm so excited.
I can't freakin. I can't move very much though,
because we just have these propped up on stilts. Yeah,
we don't have the right hinges for those. So that's what we're doing.
We just wanted to see what this looks like. You know,
and make sure we didn't hate it before, you know. We finished everything but we love it.
Yeah. Of course. It's not 100% finished because we ran into some snags.
We didn't have enough wallpaper. We didn't really have enough time.
That's actually why we haven't posted a video
in a while because we really just wanted to finish as much as possible.
We really thought that we were going to do these cabinet fronts.
Stuff. Something like a day, and it's taken about three days.
So and we still didn't, we thought we'd get this stove in but that's okay.
I can just see the whole color palette is starting to work slowly,
but surely we still have to add staying to this
and these we're still trying to decide exactly what to do but it's very dramatic looking.
Isn't that pretty cool? So if you guys can tell,
we're kind of going for like a southwest deserty Vibe,
that's our favorite type of place in the world I think.
And so it's our little desert home on Wheels,
but now I have to go home and edit this video so we can get a dang video out.
Yeah, sorry guys. Guys. Yall. We did not bring enough food with us.
Today is almost seven o'clock and I'm so hungry.
Goodbye Adventures will see you on the road.