It has three modes namely pan follow lock and roll and pan follow pan follow mode the gimbal has two
motors one is pan and the other rolled the led indicator shines blue once means pan follow mode
it is the default mode when you first turn on the gimbal pan means the gimbal would try to hold the
phone in the horizontal position by adjusting the rolled motor and smoothing the pan movements with
the help of the pan motor the mode is useful if you want to follow the subject's movement
so it should be used when the person is moving in different directions and not in a straight line
lock mode by pressing the m button once you enter into the lock mode and the led indicator shines
solid blue roll motor would try to hold the phone in the horizontal position and
the pan motor would try to hold the phone at the predefined position irrespective of your movements
use this mode when the subject is not moving and you're moving towards the subject such as in a
straight line or if the subject is moving in a straight line and you're following it for example
you could follow a person in a long corridor POV or sometimes it is called roll and pan follow
to get to this mode is a bit more tricky you have to quickly press the m button four times and then
the led indicator blinks blue twice the roll and the pan motor will collaborate with your movements
it means that you can now roll and pan simultaneously
use this mode to create creative shots by turning the gimbal the biggest difference
is that in this mode the phone is not hold in the horizontal position so what does that
means it means the gimbal would smooth out the pan and the road movement by slowing down its inertia
in any of the above modes you could use the joystick to position the roll and pan axis
this gimbal has a manual tilt axis which can be used by extending the stabilizer's grip up
to 90 degrees standby mode hold the m button few seconds the led light blinks slowly use this mode
if you want to save battery and you do not want to turn off the gimbal to reactivate the gimbal
hold the m button for few seconds again manual positioning go to the lock mode now manually move
the pan motor to your desired position and hold it in the position for the maximum of two seconds
if the gimbal has gone off center then all you need to do is just to press m button in here once
and then as you can see it went back to the center you can film in two orientations namely landscape
or portrait mode landscape is good for uploading to YouTube and portrait is good for mobile phone
content such as tick tock or Instagram to switch between the two just press the m button twice
note press the m button quickly otherwise it might not count as a press
if you have any questions please ask in the comments below if you want to learn more please
watch the other videos in here on the screen and subscribe to support my channel thank you